System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.
2
1.Switch on your radio.
2.Press and hold in the Info button until "MANUAL" appears on the display.
3. Press the Tuning Up or Down button until "FACTORY" appears on | 3 |
the display, press the Select button the display shows "RESET" and then press the Select button again.
5.A full reset will be performed, the station list and presets will be erased. The display will show "ROBERTS" and after a few seconds a station scan search will be performed automatically. The display will show progress of the station search e.g. ">>>> 18. The number on the right of the display is the number of stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product (reconnection of power source may be required) to resume normal operation.
If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.
29
down
SNOOZE
TUNING | up |
33