English
CONTROLS (see figure 1)
1AL 1 ( 
ALARM/ OFF)
-selects CD alarm;
-to cancel or switch off CD alarm.
2
-to program to your favorite CD track for
3SLEEP
-adjusts timer options for CD / radio;
-switch on radio for timer mode.
4REPEAT ALARM/ BRIGHTNESS CONTROL
5Power cord
6Coil antenna
7CD door
-lift here to open / close CD door
8ALARM RESET (CD/ RADIO OFF)
-stops CD / radio playback;
-switches off radio / CD timer (SLEEP);
-stops the active buzzer, radio or CD alarms for 24 hours.
9AL 2 ( 
ALARM/ OFF)
- selects radio | / buzzer | alarm mode; |
-to cancel or switch off radio / buzzer alarm.
0 VOLUME 3, 4
-adjusts the sound level.
!PLAY / PAUSE 2;
-starts / pauses CD playback.
@DOWN, UP ° , ¤
-adjusts clock / alarm times
-skips CD tracks / searches for a particular passage.
#Tuning indicator
-shows the radio frequency of your selected waveband.
$RADIO ON (FM/ AM)
-switches on the radio;
-selects the radio waveband.
CONTROLS/ INSTALLATION
%TUNING
-tunes to a radio station.
^ TIME/ ALARM
-toggle to set the times for the clock time, or alarm 1 or 2.
&Display
-shows the clock / alarm times and status of the unit.
POWER SUPPLY
1.Check if the power voltage, shown on the
2.Connect the
3.To disconnect the set completely from the power supply, withdraw the
The serial and production number are located on the bottom of the set.
Standby power consumption (clock mode) | 2W |
MEMORY BACKUP
The memory backup conveniently allows your clock and alarm time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure.
The complete CD clock radio and lighted display will be switched off. As soon as the power supply returns, the display will indicate the correct time.
•If power supply returns after 3 minutes you will need to
BASIC FEATURES
Display brightness
1.Toggle REPEAT ALARM/ BRIGHTNESS CONTROL. yThe brightness of the display toggles between:
low ➟ bright ➟ low
Volume
Press 4 or 3 to adjust the volume level. The volume level uo: is indicated as a number from