Roberts Radio MP-43 manual Remote control battery replacement

Remote control battery replacement Introduction

1.Remove the battery cover on the rear of your remote control by applying pressure to the catch in the direction shown by the arrow in the diagram, and then lifting the cover.

2.Insert 2 x AAA size batteries into the compartment. Make sure the (+) and the (-) ends of the batteries are positioned as shown inside the compartment.

3.Close the battery cover by inserting the retaining lugs first, then apply pressure to the free end such that the catch latches the cover securely.

4.If the remote is not to be used for an extended period of time it is recommended that the batteries are removed.

IMPORTANT: The batteries should not be exposed to excessive heat such as sunshine, fire or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre. On no account should batteries be disposed of by incineration.

2

1.	Battery compartment	1
2.	Latch
3.	Retaining lugs (inside)	3

7