Roberts Radio MP-43 manual Headphone socket, Aerial removal

Headphone socket

A 3.5mm stereo Headphone Socket is provided on the rear of your sound system for use with headphones. Inserting a plug automatically mutes the internal loudspeakers.

IMPORTANT: Excessive sound pressure from earphones and headphones can cause hearing loss.

Aerial removal

The fitted telescopic aerial is suitable for most applications. A wire aerial is provided as an alternative which may be more suitable in some installations. The telescopic aerial may be removed to allow this to be fitted, or to allow connection to an external aerial using a coaxial cable.

First remove the two small screws holding the antenna connector cover in place (use a small cross-head screw driver). Then using the supplied spanner, remove the telescopic aerial by rotating in an anti-clockwise direction when viewed from the rear of the product.

The wire aerial that is provided with your sound system simply pushes on to the exposed F-type connector. Fully extend the wire aerial and arrange it as needed for optimum radio reception.

Audio and Setup

43