Software version
The software display cannot be altered and is just for your reference.
1.To view which software version your clock radio has ensure your clock radio is in DAB mode and press the Menu button to enter the menu setup.
2.Press the Skip Up or Down buttons until "SW Version" together with the Version number appears on the display.
System Reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1.While in DAB or FM mode press and hold the Menu button until the display shows "Press SELECT to confi rm reset".
2.Press and release the Select button to select system reset.
A full reset will be performed and the station list together with any preset stations will be erased.
In case of malfunction due to electrostatic discharge, just reset the product to resume normal operation. It may be necessary in some cases to disconnect the mains power and then reconnect after 10 seconds.
In case of malfunction due to electrical fast transient (Burst), just reset the product (reconnect of power source may be required) to resume normal operation.
1
2
2
1
2
31