JVC KS-FX822R manual Tuning into a preset DAB service, To use Alternative Reception

ENGLISH

Tuning into a preset DAB service

You can easily tune into a preset DAB service. Remember that you must store services first. If you have not stored them yet, see page 31.

1 Select the DAB tuner.

Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.

DAB FM/AM

2 Select the DAB band (DAB1, DAB2 or DAB3) you want.

Each time you press the

button, the DAB band changes as follows:

D1	D2	D3
(DAB 1)	(DAB 2)	(DAB 3)

3 Select the number (1 – 6) for the preset DAB service you want.

7 8 9 10 11 12

What you can do more with DAB

Tracing the same program automatically (Alternative Reception)

You can keep listening to the same program.

•While receiving a DAB service:

When driving in an area where a service cannot be received, this unit automatically tunes into another ensemble or FM RDS station, broadcasting the same program.

•While receiving an FM RDS station:

When driving in an area where a DAB service is broadcasting the same program as the FM RDS station is broadcasting, this unit automatically tunes into the DAB service.

Note:

When reception switches between DAB and FM, the listening volume level may increase or decrease inconveniently. This change in the volume level results from unequal audio injection levels at broadcaster site, but not from the malfunction of this unit.

To use Alternative Reception

When shipped from the factory, Alternative Reception is activated.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “DAB AF” (alternative frequency).

3 Turn the control dial to select the desired mode.

•AF ON: Traces the program among DAB services and FM RDS stations

—Alternative Reception. The AF indicator lights up on the display (see page 10).

•AF OFF: Deactivates Alternative Reception.

Note:

When Alternative Reception (for DAB services) is activated, Network-Tracking Reception (for RDS stations: see page 10) is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception.

4 Press SEL (select) to finish the setting.

32