JVC KS-FX822R manual Using the sound control memory, Recalling the sound modes, English

ENGLISH

Using the sound control memory

You can select and store a preset sound

adjustment suitable for each playback source

(Advanced SCM).

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, tape and external components.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM – SCM LINK” on page 24.

Select the sound mode you want.

Ex.: When you select “BEAT”

Each time you press the button, the sound mode changes as follows:

SCM OFF (BEAT) (SOFT) (POP)

•When “SCM LINK” is set to “LINK ON,” the selected sound mode can be stored in memory for the current source and the effect applies only to the current source. Each time you change the playback source, the SCM indicator flashes on the display.

•When “SCM LINK” is set to “LINK OFF,” the selected sound mode effect applies to any source.

Indication	For:	Preset values
		BAS	TRE	LOUD
BEAT	Rock or disco	+02	00	ON
	music
SOFT	Quiet	+01	–03	OFF
	background
	music
POP	Light music	+04	+01	OFF
SCM OFF	(Flat sound)	00	00	ON

Recalling the sound modes

When “SCM LINK” is set to “LINK ON,” select the source.

Each time you change the playback source, the SCM indicator flashes on the display.

The sound mode stored in memory for the

selected source is recalled.

Notes:

•You can adjust each sound mode to your preference, and store it in memory.

If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 21.

•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see page 19. (Your adjustments will be canceled if another source is selected.)

20