Selecting a station - DAB
1.Place the wire antenna so that it is as straight as possible extending either above or below the radio.
3
2.Press the Standby button to switch on your radio.
3.During the clock setting the radio carried out a quick scan of the UK
DAB channels. If this was not successful or if you have moved the |
|
|
radio to a different part of the country press the Auto tune button. | 4 | 4 |
During Autotune, the display will show "Scanning" and as each group |
of stations is detected the station count will be updated. The top line of the display shows a bargraph indicating progress of the Autotune. When the Autotune is completed the fi rst station (in
4.Thetoplineofthedisplayshowsthenameofthestationcurrentlyselected. Press the Tuningup/downbuttons to scroll through the list of available stations. Stop pressing the Tuning up or down buttons when you fi nd the station that you wish to hear.
5.Press and release the Select button to select the station. The display may show "Now tuning" while your radio fi nds the new station.
5
6
6. Adjust the Volume and Tone controls to the required setting.
Note: If after selecting a station the display shows "Not Available" it | 6 |
may be necessary to relocate your radio to a position giving better reception.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
10