Changing the back-up battery
1.Purchase a replacement lithium backup battery type CR2032 or equivalent.
2.Remove the new battery from its packaging so that it is ready to install.
3.Important: Maintain connection to AC mains supply during battery replacement. This will provide power whilst the original battery is removed.
4.Use a small screwdriver to remove the small screw securing the battery holder on cabinet base.
5.Remove the battery holder from cabinet.
6.Remove old battery from holder. Replace new battery with + sign facing direction shown in drawing opposite.
7.Replace the holder into cabinet back.
8.Refit the small screw to secure holder.
9.Check that the 'Battery low' indicator is not lit.
If you need any further advice, please call our Technical Helpline on :-
4
9
16
020 8758 0338