Roberts Radio CR9955 Switching on, Setting the time manually, See section on Back-up battery on

Page 7

Switching on

1.Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on.

2. After a few seconds the time, day and date will set automatically. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your clock radio will automatically reset to the correct time should the power source be interrupted. It will also automatically adjust for summer/winter time.

See section on Back-up battery on page 15 .

Should the time, date or year require adjustment follow the procedure shown in the next sections.

Setting the time manually

1. Press and hold down the Time button.

2. Whilst holding down the Time button press the Up or Down buttons to set the time. Release the buttons when the correct time is reached.

12

The clock uses a 12 hour display with a PM indicator. Ensure that

2

the correct 12 hour cycle is selected.

If you need any further advice, please call our Technical Helpline on :-

6

 

020 8758 0338 (Mon-Fri)

Image 7
Contents CR9955 Band Auto Set Dual Alarm Clock RadioContents Controls Top Controls Front Controls Right side Controls Base Setting the time manually Switching onSee section on Back-up battery on Setting the date manually Setting the year manuallyUp or Down buttons Setting alarm mode Setting alarm timesPress and hold down the Alarm 1 or Alarm 2 buttons Alarm days are Setting alarm dayButton Weekend alarmMonday to Saturday alarm Checking alarm mode Checking alarm timesSnooze control Sleep timerListening to the radio Back-up battery Dimmer switchChanging the back-up battery Time Zones Power Requirements Specifications Circuit featuresMains supply GeneralFuse Page Page Guarantee Roberts Radio Technical Services