Programmed play
By programming the player you can play up to 20 tracks in any desired order.
1.Whilst the CD is in Stop mode, press the Program button. The display will flash ‘01’ once before flashing '00'. TheProgram indicator will flash.
2.Select the first track using the F.skip or B.skip buttons. The track number will flash on the display. Store this track by pressing the Program button. The display will flash the next counter number (‘02’) once before flashing '00'.
3.Repeat the above steps until you have completed your program (maximum 20 tracks). Press the Play/Pause button to commence play of the selected tracks.
4.To stop the program press the Stop button. The display will show the total number of tracks. To resume program play press the Program button, the display will flash the program counter number ('03') once before flashing the programmed track number.
1
PROGRAM
2
/
POWER
REPEAT
4
STOP
4
PROGRAM
POWER | PROGRAM |
REPEAT | PLAY/PAUSE |
2 | 2 |
/ | PROGRAM |
PROGRAM
PLAY/PAUSE
3
PLAY/PAUSE
POWER | PROGRAM |
REPEAT | PLAY/PAUSE |
14