Editing a programme
1.Whilst the CD is in Stop mode, repeatedly press the Program button to step through the tracks programmed until you find the desired counter number. The display will flash the counter number (‘03’) once before flashing '00'. TheProgram indicator will flash.
2.Select a new track using the F.skip or B.skip buttons. The track number will flash on the display. Store this track by pressing the Program button. The display will flash the selected track number (‘14’). The new track has been stored in the program.
3.Press the Play/Pause button to play the revised program tracks.
If you need any further advice, please call our Technical Helpline on :-
1
PROGRAM
2
/
POWER
REPEAT
POWER | PROGRAM |
REPEAT | PLAY/PAUSE |
2 | 2 |
/ | PROGRAM |
| PROGRAM |
PLAY/PAUSE | 3 |
PLAY/PAUSE
020 8758 0338
15