Setting Alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position. Alarm 2 time will show in the display.
1 2
2.Press the F.Fwd button to increase the time at a fast rate. The S.Fwd button will increase the time at a slow rate. The F.Rev and S.Rev buttons decrease the time at fast and slow rates. Release the buttons when the correct time is reached. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
3. Slide the Alarm 2 function switch to the 'On' position. The display | 2 | 2 |
will revert to showing time and the Alarm 2 indicator will light. |
|
|
2
3
Checking the Alarm Times
1.To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will show in the display.
2.Return the Alarm 1 function switch to its previous position. The display will revert to showing time.
3.To check Alarm 2 time, set the Alarm 2 function switch to the 'Adj' position. Alarm 2 time will flash in the display.
4.Return the Alarm 2 function switch to its previous position. The display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches are set to the 'Adj' position.
1
3
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 15 |
|