Switching on and setting the time
Before using your CD clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on at the wall socket.
2. The clock display will show 12:00. Ensure that the Alarm 1 and Alarm 2 function switches are set to the 'Off' position.
3. Whilst holding down the Time Set button press the F.Fwd button to increase the time at a fast rate. The S.Fwd button will increase the time at a slow rate. The F.Rev and S.Rev buttons decrease the time at fast and slow rates. Release the buttons when the correct time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
22
3
3 | 3 | 3 | 3 |
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 5 |
|