
General Configuration Screen
6.6.4Setting the Default Interface
The default interface is the interface channel for the designated default gateway. Set the default interface by performing the following steps:
1.Use the arrow keys to highlight the Default Interface field.
2.Enter the interface number for the default gateway in this field with a value from 1 to 16.
3.Press ENTER. If the interface number entered is a valid format, the cursor returns to the beginning of the Default Interface field. If the entry is not valid, the Event Message Line displays “PERMISSIBLE RANGE: 1...16”. Local Management does not alter the current value, but it does refresh the Default Interface field with the previous value.
4.Use the arrow keys to highlight the SAVE command.
5.Press ENTER. The Event Message Line at the top of the screen displays “SAVED OK”.
6.6.5Setting the TFTP Gateway IP Address
If the network TFTP server is located on a different IP subnet than the
1.Use the arrow keys to highlight the TFTP Gateway IP Address field.
2.Enter the IP address of the TFTP gateway using the DDN format. For example: 134.141.80.122
3.Press ENTER. If the TFTP gateway IP address entered is a valid format, the cursor returns to the beginning of the TFTP Gateway IP Address field. If the entry is not valid, the Event Message Line displays “INVALID TFTP GATEWAY IP ADDRESS OR FORMAT ENTERED”. Local Management does not alter the current value, but it does refresh the TFTP Gateway IP Address field with the previous value.
4.Use the arrow keys to highlight the SAVE command.
5.Press ENTER. The Event Message Line at the top of the screen displays “SAVED OK”.
|