Appendix C: Optional Installations and Mode Switch Bank Settings

4.See Figure C-5. Gently pull the faceplate of the 8H02-16 forward to allow room for the Fast Ethernet Interface Modules to be aligned over the connector.

5.Carefully lower the Fast Ethernet Interface Module onto the standoffs while inserting the module connector into the associated motherboard connector.

Faceplate

FE-

10

 

 

 

100TX

100

 

 

Module

Module Connector

Standoff

Motherboard Connector

15

16

Standoffs

1742-39

Figure C-5 Installing the Fast Ethernet Interface Module

6.Press down firmly on the Fast Ethernet Interface Module until the pins slide all the way into the motherboard connector. Ensure that the Fast Ethernet Interface Module seats flush on the standoffs.

7.Secure the Fast Ethernet Interface Module with the screws saved in steps 2 and 3.

8.Installation is complete. Reinstall the chassis cover, reconnect all network cables and reconnect the power cord to the 8H02-16.

C-8

8H02-16 User’s Guide

Page 126
Image 126
Cabletron Systems 8H02-16 manual Figure C-5 Installing the Fast Ethernet Interface Module