Cabletron Systems 8H02-16 manual Clear Nvram Screen

Clear NVRAM Screen

Clear NVRAM as follows:

1.Use the arrow keys to highlight the Clear NVRAM field.

2.Use the SPACE bar to toggle the field to YES.

3.Use the arrow keys to highlight EXECUTE at the bottom of the screen.

4.Press ENTER. The warning shown in Figure 6-16 is displayed.

WARNING

YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT CONFIGURATION, THEN RESET THE BOARD.

ARE YOU SURE YOU WANT TO CLEAR NVRAM?

YES NO

174251

Figure 6-16 Clear NVRAM Warning Screen

5.Press YES and the message “CLEARING NVRAM. REBOOT IN PROGRESS...” appears.

6.The 8H02-16 clears NVRAM and reboots. All user-entered parameters default to factory default settings.

8H02-16 User’s Guide 6-49