Samsung CP1370-B/XEO manual Error Codes

Electronic interference causes display to be reset.

• Disconnect the power plug and reconnect it. Reset the time.

Condensation appears inside the oven.

• This is a normal occurrence. Simply wipe away after cooking.

The fan continues to operate after the oven has been turned off.

•This is a normal occurrence. Cooling fan may continue to operate for up to three minutes after oven has been turned off.

Air flow is detected around the door and outer casing.

• This is a normal occurrence.

Light reflection around the door and outer casing.

• This is a normal occurrence.

Steam escapes from around the door or vents.

• This is a normal occurrence.

A clicking sound occurs while the oven is operating, especially in defrosting mode.

• This is a normal occurrence.

ERROR CODES

Error Code	General Functions
	TEMP SENSOR OPEN
	In case the value of the temperature sensor is more than 250
	°C during operation / cancellation.
	TEMP SENSOR SHORT
	In case the value of the temperature sensor is less than 5 °C
	during operation / cancellation.
	OVER 230 °C DURING OPERATION OF MWO MODE
	In case the temperature rises over 230 °C during operation of
	mwo mode (fire sensed).
	DAMPER S/W
	In case it fails to sense the DAMPER to open or close for 1
	minutes.

58_troubleshooting and error code

CP1370-B_XEO_DE68-04022D_EN.indb 58

2012-08-16 �� 3:48:22