Cabletron Systems 8H02-16 manual High Speed Interface Configuration Screen

High Speed Interface Configuration Screen

6.14HIGH SPEED INTERFACE CONFIGURATION SCREEN

The High Speed Interface Configuration screen, Figure 6-13, applies only to ports 15 and 16. This screen supports the FE-100TX and the FE-100FX Fast Ethernet Interface Modules that operate at 100 Mbps.

The High Speed Interface Configuration screen displays the types of interfaces installed in ports 15 and 16, their current operating mode, and indicates if the ports are linked. This screen also allows the user to enable or disable Auto-Negotiation and set the Advertised Ability.

The High Speed Interface Configuration screen is accessed from the Device Specific Configuration Menu screen by using the arrow keys to highlight the High Speed Interface Configuration option and pressing ENTER. The High Speed Interface Configuration screen appears.

Event Message Line

	8H02-16 LOCAL MANAGEMENT
	High Speed Interface Configuration
Device Name: 8H02-16		Firmware Revision: XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
	Port 15		Port 16
Port Type	FE-100TX		N/A
Link Status	Link		No Link
Current Oper. Mode	100Base-TXFD		[N/A]
Desired Oper. Mode	[Auto-Negotiation]		[N/A]
Advertised Ability	[100Base-TXFD]	[Disabled]	[N/A]

SAVE

RETURN

174224

Figure 6-13 High Speed Interface Configuration Screen

8H02-16 User’s Guide 6-39