Kyocera Fs-4020dn, FS-3920DN Configuring Status Monitor, Locking the Security Watermark Settings

Advanced

Only on specified pages

This option prints the security watermark on the page numbers typed in the text box.

Print onto front outside cover

This option prints the security watermark on the front cover. This option is available when Cover mode is selected in the Publishing tab. If Cover mode and Front outside are both selected in the Publishing tab, Print onto front outside cover is selected automatically.

4 In all dialog boxes, click OK.

Locking the Security Watermark Settings

1

2

3

4

The administrator can ensure that a security watermark is printed on all jobs by locking the selected security watermark.

In the Advanced tab, select security watermark options and adjust the calibration.

Select Device Settings > Administrator > Lock Security Settings.

In the Lock Security Settings dialog box, type a 4-16 character password, and type again to confirm.

In all dialog boxes, click OK.

To unlock the security watermark, clear Lock Security Settings and type the password.

To unlock the security watermark temporarily to change settings, in Advanced

>Security Watermark, click Unlock and type the password. After changing the settings, the security watermark remains locked until it is unlocked in Device Settings > Administrator Settings.

Configuring Status Monitor

1

2

3

The Status Monitor displays printing system status messages in the lower right corner of the window during printing. You can start a status monitor for each supported printing system. More than one status monitor can be displayed at one time.

In the Advanced tab, click Status Monitor.

If you want the Status Monitor image to appear during a print job, in the Status Monitor dialog box, select the Status Monitor check box.

To view the print job status without changing the Status Monitor setting, click Open Status Monitor.

The Status Monitor image appears in the lower right corner of your computer screen.

KX DRIVER 9-8