Kyocera FS-3920DN, Fs-4020dn, Fs-2020d manual Basic Paper Settings

4 Basic

In the Basic tab, you can specify the most commonly used printer driver settings.

Basic Paper Settings

The Basic tab contains several settings for the most commonly used printing tasks.

Print size

This setting sets the size of the area that the printer prints to, regardless of the actual paper size that is used by the printing system.

Source

This setting specifies the cassette or tray that the printing system draws paper from. Unless you are using a custom paper type, you can leave it set to Auto source selection.

Media type

This setting selects the Source based on the types of media that are specified in the printing system. In general, you can leave it set to Auto media selection.

Destination

This setting specifies which output tray is used for the print job output.

Orientation

This setting specifies the paper orientation of the print job. If Rotated is selected, the print job orientation is rotated 180 degrees.

4-1 User Guide