0 |
| A – Command Line Interface |
|
| |
|
| Show Log Command |
|
|
|
|
|
|
| Zoning | |
| Monitors zoning conflict events. | |
| display [filter] | |
| Displays log events on the screen according to the component or severity level | |
| filter given by [filter]. [filter] can be one of the following: | |
| Info | |
| Displays all informative events. | |
| Warning | |
| Displays all warning events. | |
| Critical | |
| Displays all critical events. | |
| Eport | |
| Displays all events related to E_Ports. | |
| Mgmtserver | |
| Displays all events related to the management server. | |
| Nameserver | |
| Displays all events related to the name server. | |
| Port [port_number] | |
| Displays all events related to the port given by [port_number]. | |
| SNMP | |
| Displays all events related to SNMP. | |
| Switch | |
| Displays all events related to switch management. | |
| Zoning | |
| Displays all events related to zoning. | |
| level | |
| Displays the event severity level logging setting and the display level setting. | |
| options | |
| Displays the options that are available for configuring event logging and automatic | |
| display to the screen. Refer to the for information about how to configure event | |
| logging and display level. | |
| port | |
| Displays the ports being monitored for events. If an event occurs which is of the | |
| defined level and on a defined component, but not on a defined port, no entry is | |
| made in the log. | |
| settings | |
| Displays the current filter settings for component, severity level, port, and display | |
| level. This command is equivalent to executing the following commands | |
| separately: Show Log Component, Show Log Level, and Show Log Port. | |
