Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic SANBOX2-8C/16 manual Table A-10. Set Config Switch Parameters

Models: SANBOX2-8C/16

1 266

Download 266 pages 59.06 Kb

Page 194

A – Command Line Interface			0
A – Command Line Interface
Set Config Command


	Table A-10. Set Config Switch Parameters (Continued)

		Parameter	Description

	PrincipalPriority		The priority used in the FC-SW-2 principal
			switch selection algorithm. 1 is high, 255 is
			low. The default is 254.
	ConfigDescription		Switch configuration description. The
			configuration description can be up to 32
			characters excluding #, semicolon (;), and
			comma (,). The default is Config Default.
	InteropMode		Propagates just the active zone set
			throughout the fabric (True, compliant) or
			the entire zoning database (False,
			non-compliant). The default is True.
	LegacyAddressFormat		Available only when the InteropMode
			parameter is False, this parameter
			enables (True) or disables (False) the use
			of legacy address formatting for
			interoperating with non-FC-SW-2
			switches. Refer to ”InteropMode” on
			page A-42. The default is False.

A-42	59022-10 A

Image 194

Q-Logic SANBOX2-8C/16 manual Table A-10. Set Config Switch Parameters

Contents

SANbox2-8c/16 Switch Management User’s Guide SANbox2-8c/16 Switch Management User’s Guide Document Revision HistoryTable of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Section Managing Switches Section Managing Ports 4.1 Snmp Configuration 4.2 Snmp Trap ConfigurationChanging the Default Performance View File Encryption Key 3.3 NTP ClientAppendix a Command Line Interface 7.3Glossary Index FiguresTables Switch Operational Parameters SANbox2-8c/16 Switch Management User’s Guide 59022-10 a Intended Audience Related MaterialsJdom License Training Technical SupportAvailability Contact InformationIntroduction Technical Support 59022-10 a Using SANsurfer Switch Manager Installing the Management ApplicationFor a Linux workstation SANsurfer Switch ManagerFor a Windows workstation For a Solaris workstationSMS Installation for Windows SANsurfer Management SuiteChglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup DialogSANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Management SuiteUninstalling SANsurfer Switch Manager SMS UninstallStandalone Uninstall Pkgrm QLGCsolSetting SANsurfer Switch Manager Preferences Saving and Opening Fabric View FilesPreferences Dialog SANsurfer Switch Manager Using Online Help Viewing Software Version and Copyright InformationFaceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu options in the topology display are shown in Figure Menu BarTopology Display Menu Faceplate Display Menu Menu options in the faceplate display are shown in FigureTopology Display Shortcut Keys Topology Display Menu Shortcut KeysFaceplate Display Shortcut Keys Faceplate Display Menu Shortcut KeysReset Hot reset Hard Reset 59022-10 a Tool Bar Tool Bar ButtonsFabric Tree Fabric TreeData Window and Tabs Working Status IndicatorGraphic Window Using the Topology Display Switch and Link StatusArranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Opening the Faceplate Display and Topology Popup Menus Topology Data WindowsUsing the Faceplate Display Port Views and StatusOpening the Faceplate Popup Menu Working with PortsSelecting Ports Faceplate Data Windows Page Components of Fibre Channel fabric security are Fabric SecurityUser Account Security Click the In-band Management Enable button Fabric ServicesEnabling Snmp Configuration Enabling In-band ManagementViewing and Comparing Version Snapshots Fabric TrackerSaving a Version Snapshot Exporting Version Snapshots to a File Managing the Fabric DatabaseAdding a Fabric Add a New Fabric DialogSaving a Fabric View File Removing a FabricOpening a Fabric View File Rediscovering a FabricAdding a New Switch to a Fabric Replacing a Failed Switch Fabric Status Deleting Switches and LinksDisplaying Fabric Information Topology Display Switch and Status Icons Switch Icon DescriptionDisplaying the Event Browser Events BrowserSeverity Levels Description IconFiltering the Event Browser Filter Events DialogSorting the Event Browser Saving the Event Browser to a FileDevices Data Window Devices Data Window EntriesActive Zone Set Data Window Active Zone Set Data WindowWorking with Device Information and Nicknames SANsurfer Switch Manager enables you to do the followingLink Data Window Displaying Detailed Device InformationCreating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Zones Soft ZonesZone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Editing the Zoning Database Edit Zoning DialogManaging Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto SaveRestoring the Zoning Database from a File Default VisibilitySaving the Zoning Database to a File Managing Zone Sets Restoring the Default Zoning DatabaseRemoving All Zoning Definitions Creating a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from a Zone Set Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from All Zone SetsCreating an Alias Changing Zone TypesManaging Aliases Adding a Member to an Alias Removing an Alias from All ZonesMerging Fabrics and Zoning Zone Merge FailureZone Merge Failure Recovery Managing Switches Managing User Accounts Factory User AccountsUser Account Administration Dialog Add Account Creating User AccountsUser Account Administration Dialog Remove Account Removing a User AccountChanging a User Account Password User Account Administration Dialog- Change PasswordUser Account Administration Dialog Modify Account Modifying a User AccountDisplaying Switch Information Faceplate DisplayManaging Switches Displaying Switch Information Switch Data Window Switch Data Window EntriesRatov Displaying Detailed Device Information on page 3-17for Port Statistics Data Window Port Information Data WindowConfigured and Active Zonesets Data Window Configured Zonesets Data WindowConfiguring Port Threshold Alarms Port Threshold Alarm Configuration DialogCount Paging a SwitchEvent Sample WindowSetting the Date/Time and Enabling NTP Client Resetting a SwitchSwitch Resets Type DescriptionConfiguring a Switch Using the Configuration WizardSwitch Properties 10. Switch Properties DialogSwitch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management InterfaceBroadcast Support In-band ManagementInterop Mode for Zoning Legacy Port Address FormatTimeout Values Timeout ValuesNetwork Properties 11. Network Properties DialogIP Configuration IP Configuration ParametersRemote Logging NTP ClientSnmp Properties 12. Snmp Properties DialogSnmp Configuration Snmp Configuration ParametersSnmp Trap Configuration Snmp Trap Configuration ParametersArchiving a Switch Restoring a Switch13. Restore Dialogs Full and Selective Restoring the Factory Default Configuration Factory Default Configuration SettingsFactory Default Configuration Settings Installing Firmware Downloading a Support FileManaging Switches Installing Firmware Displaying Hardware Status 14. Hardware Status LEDsManaging Switches Displaying Hardware Status 59022-10 a Managing Ports Displaying Port InformationPort Types Monitoring Port StatusDisplaying Port Types Port Operational States Displaying Port Operational StatesDisplaying Port Speeds Port SpeedsDisplaying Transceiver Media Status Transceiver Media ViewPort Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties DialogChanging Port Administrative States Port Administrative StatesChanging Port Speeds Changing Port Types Scan Device Changing Port Symbolic NameStream Guard Using the Extended Credits Wizard Designate Donor PortsResetting a Port Testing PortsTesting Ports Graphing Port Performance Fabric View GraphsStarting SANsurfer Performance Viewer Save Default Performance View File Dialog Exiting SANsurfer Performance ViewerSaving and Opening Performance View Files DisplayedSetting the Polling Frequency Changing the Default Performance View File Encryption KeySetting SANsurfer Performance Viewer Preferences Displaying Graphs Arranging Graphs in the DisplayDefault Graph Options Dialog Customizing Graphs„ Total frames transmitted Total Tx Frames Errors check box„ Total frames transmitted and received Total Frames „ Total frames received Total Rx FramesSaving Graph Statistics to a File Rescaling a Selected GraphPrinting Graphs Command Line Interface Logging On to a SwitchWorking with Switch Configurations User AccountsModifying a Configuration Backing up and Restoring Switch Configurations Command as shown Date, configswitch16910112003, for exampleCommands Table A-1. Command-Line CompletionTable A-2. Commands Listed by Authority Level Admin Session CommandsSyntax Admin CommandAuthority KeywordsAlias Command Syntax aliasRename aliasold aliasnew Members aliasRemove alias memberlist Keywords activate configname Config CommandSyntax config Edit confignameRestore command RestoreManager Archive function are not compatible with the Config Save configname# ftp symbolicname or ipaddress Download the file to the workstationFollowing is an example of the Create Support command Create Support CommandAdmin session Create supportYou have transferred 43430 bytes in 1 files Keywords MMDDhhmmCCYY Date CommandSyntax date Syntax firmware install Firmware Install CommandAuthority Admin Hardreset Command SyntaxSyntax help command keyword Help CommandKeywords command Authority NoneHistory Command Authority None Syntax historyHotreset Command HotresetInstall Image CommandCleanup ImageFtp Ftp switchname Wait for the unpack to complete Reinitializes the specified loop port Lip CommandFollowing is an example of the Lip command Lip portnumberPasswd Command Syntax passwd accountname Keywords accountnameKeywords ipaddress Ping CommandSyntax ping ipaddress Syntax Examples Ps CommandFollowing is an example of the Ps command Displays current system process informationSyntax quit, exit, or logout Quit CommandCloses the Telnet session Reset Command Config confignameZoning Table A-3. Switch Configuration DefaultsSystem Table A-4. Port Configuration Defaults ArbffTable A-5. Port Threshold Alarm Configuration Defaults Table A-6. Zoning Configuration DefaultsTable A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Set Command Syntax setPort option Setup optionSwitch state Table A-9. Set Config Port Parameters Set Config CommandSet config Port portnumberSend Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Table A-10. Set Config Switch Parameters Table A-11. Set Config Threshold Parameters ThresholdTable A-12. Set Config Zoning Parameters Following is an example of the Set Config Switch command ArbffFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command AttributesArchive Set Log CommandSet log ClearDisplay filter Level filterStart Port portlistSave StopSet Port Command Command Line Interface Set Port Command Table A-13. Snmp Configuration Settings Set Setup CommandSet setup Snmp SystemTable A-14. System Configuration Settings Table A-14. System Configuration Settings If you wish Following is an example of the Set Setup System command SANbox2 admin # set setup systemKeywords about Show CommandAlarm option BroadcastNs option Fdmi portwwnLog option Table A-15. Show Port Parameters PagebreakPerf option Lipalpdalps Post log Steering domainidTable A-16. Switch Operational Parameters SupportUsers TopologyDisplays all connected devices Version Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show Fdmi command Following is an example of the Show Fdmi WWN commandFollowing is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Following is an example of the Show Interface command Collisions0 txqueuelen100Following is an example of the Show Port command PL-XPL-VC-SG3-22Following is an example of the Show Switch command Following is an example of the Show Topology commandCommand Line Interface Following is an example of the Show Version command Show Config Command Show configFollowing is an example of the Show Config Switch command Following is an example of the Show Config Threshold commandFollowing is an example of the Show Config Zoning command Number of events Show Log CommandShow log ComponentOptions SettingsLevel PortFollowing is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup System command Command Line Interface Show Setup CommandShutdown Shutdown CommandPower from the switch Port portnumber testtype Test CommandTest StatusTest port x internal Command Line Interface Test Command Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command Following is an example of the User Add command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List commandWhoami Whoami CommandFollowing is an example of the Whoami command Zone Command Syntax zoneRename zoneold zonenew Members zoneRemove zone memberlist Type zone zonetypeFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zonesetZones zoneset Remove zoneset zonelistRename zonesetold zonesetnew Opens a Zoning Edit session Zoning CommandKeywords active HistoryLimits Table A-17. Zoning Database LimitsFollowing is an example of the Zoning Limits command E1JBOD1 E2JBOD2Following is an example of the Zoning List command 102 59022-10 a Alarm Access Control List ZoneAdministrative State BootPDefault Visibility Class 3 ServiceConfigured Zone Sets Fabric Management SwitchMaintenance Button Input Power LEDInter-Switch Link Maintenance ModeSANsurfer Switch Manager Power On Self Test PostPrincipal Switch Small Form-Factor PluggableIndex Index-2 59022-10 a 59022-10 a Index-3 Index-4 59022-10 a 59022-10 a Index-5 Index-6 59022-10 a 59022-10 a Index-7