Q-Logic SANBOX2-8C/16 manual Table A-14. System Configuration Settings

A – Command Line Interface		0
Set Setup Command
	Table A-13. SNMP Configuration Settings (Continued)
	Entry	Description
	ReadCommunity	Read community password that authorizes an SNMP agent to
		read information from the switch. This is a write-only field. The
		value on the switch and the SNMP management server must
		be the same. The read community password can be up to 32
		characters excluding #, semicolon (;), and comma (,). The
		default is “public”.
	WriteCommunity	Write community password that authorizes an SNMP agent to
		write information to the switch. This is a write-only field. The
		value on the switch and the SNMP management server must
		be the same. The write community password can be up to 32
		characters excluding #, semicolon (;), and comma (,). The
		default is “private”.
	TrapCommunity	Trap community password that authorizes an SNMP agent to
		receive traps. This is a write-only field. The value on the switch
		and the SNMP management server must be the same. The
		trap community password can be up to 32 characters excluding
		#, semicolon (;), and comma (,). The default is “public”.
	AuthFailureTrap	Enables (True) or disables (False) the generation of traps in
		response to trap authentication failures. The default is False.
	ProxyEnabled	Enables (True) or disables (False) SNMP communication with
		other switches in the fabric. The default is True.

system

Prompts you in a line-by-line fashion to change system configuration settings. Table A-14describes the system configuration fields. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

Note: Changing the IP address will terminate all Ethernet management sessions.

Table A-14. System Configuration Settings

Entry	Description
Eth0NetworkDiscovery	Ethernet boot method: 1 - Static, 2 - Bootp, 3 - DHCP,
	4 - RARP. The default is 1 - Static.
Eth0NetworkAddress	Ethernet Internet Protocol (IP) address. The default is
	10.0.0.1.

A-54 59022-10 A