![](/images/new-backgrounds/1174782/174782329x1.webp)
0 |
| A – Command Line Interface |
|
| |
|
| Config Command |
|
|
|
|
|
|
| The following is an example of how to create a backup file (configdata) and | |
| download the file to the workstation. | |
| SANbox2 #> admin start | |
| SANbox2 (admin) #> config backup | |
| SANbox2 (admin) #> admin end | |
| SANbox2 #> exit | |
| #>ftp symbolic_name or ip_address | |
| user: images | |
| password: images | |
| ftp> bin | |
| ftp> get configdata | |
| ftp> quit | |
| The following is an example of how to upload a configuration backup file | |
| (configdata) from the workstation to the switch, and then restore the configuration. | |
| #> ftp symbolic_name or ip_address | |
| user: images | |
| password: images | |
| ftp> bin | |
| ftp> put configdata | |
| ftp> quit | |
| SANbox2 #> admin start | |
| SANbox2 (admin) #> config restore | |
| The switch will be reset after restoring the configuration. | |
| Please confirm (y/n): [n] y | |
| Alarm Msg: [day month date time year][A1005.0021][SM][Configuration is being | |
| restored - this could take several minutes !] | |
| Alarm Msg: [day month date time year][A1000.000A][SM][The switch will be reset in | |
| 3 seconds due to a config restore] | |
| SANbox2 (admin) #> | |
| Alarm Msg: [day month date time year][A1000.0005][SM][The switch is being reset] | |
| Good bye. |