0

4 – Managing Switches

 

 

Configuring a Switch

 

 

 

 

4.7.2

Switch Properties

To open the Switch Properties dialog, either select a switch in the topology display or open the faceplate display for the switch you will be configuring, and then open the Switch menu and select Switch Properties. You may also right-click a switch graphic in the topology display or faceplate display, and select Switch Properties from the popup menu. Use the Switch Properties dialog to change the following switch configuration parameters:

„Symbolic Name

„Switch Administrative States

„Domain ID and Domain ID Lock

„Fabric Device Management Interface

„Broadcast Support

„Broadcast Support

„Interop Mode for Zoning

„Legacy Port Address Format

„Timeout Values

The timeout values are displayed only for reference purposes when the switch is online; they become active when the switch is taken offline. After making changes, click the OK button to put the new values into effect.

Figure 4-10. Switch Properties Dialog

59022-10 A

4-19

Page 107
Image 107
Q-Logic SANBOX2-8C/16 manual Switch Properties Dialog