Q-Logic SANBOX2-8C/16 manual Adding a Fabric, Add a New Fabric Dialog

0	3 – Managing Fabrics
	Managing the Fabric Database

3.3.1

Adding a Fabric

To add a fabric to the database, do the following:

1.Open the Fabric menu and select Add Fabric to open the Add a New Fabric dialog as shown in Figure 3-2.

Figure 3-2. Add a New Fabric Dialog

2.Enter a fabric name (optional) and the IP address of the switch through which to manage the fabric.

3.Enter an account name and password. The factory login name and password are "admin" and "password". The password is for the switch and is stored in the switch firmware. Refer to ”Managing User Accounts” on page 4-2or the ”User Command” on page A-88for information about creating user accounts.

4.Click the Add Fabric button.

Note: A switch supports a combined maximum of 19 logins or sessions reserved as follows:

„4 logins or sessions for internal applications such as management server and SNMP

„9 high priority Telnet sessions

„6 logins or sessions for SANsurfer Switch Manager inband and out-of-band logins, Application Programming Interface (API) inband and out-of-band logins, and Telnet logins.

Additional logins will be refused.

59022-10 A 3-5