Q-Logic SANBOX2-8C/16 manual Port Information Data Window Entries

0			5 – Managing Ports
			Displaying Port Information
	Table 5-5. Port Statistics Data Window Entries (Continued)
	Entry	Description
	Total Errors	Total number of primitive and non-primitive port link errors.
	Total Link Resets	Number of link-reset primitives the transmitted by the port.
	Total LIPs Received	Number of loop initialization primitive frames received.
	Total LIPs Transmitted	Number of loop initialization primitive frames transmitted.
	Tx Offline Sequences	Number of offline primitives transmitted by the port.
	Total Rx Frames	Total number of frames received by the port.
	Total Rx Words	Total number of words received by the port.
	Total Tx Frames	Total number of frames transmitted by the port.
	Total Tx Words	Total number of words transmitted by the port.
	Tx Link Resets	Number of link reset primitives sent from this port to an
		attached port.
	Total Offline	Total number of offline sequences transmitted and received by
	Sequences	the port.

5.1.3

Port Information Data Window

The Port Information data window displays detail information for the selected port. To open the Port Information data window, click the Port Info tab below the data window in the faceplate display.

Table 5-6. Port Information Data Window Entries

Entry	Description
Port Address	Port Fibre Channel address.
Administrative Port Type	The administrative port type (G, GL, F, FL,
	or Donor). This value is persistent; it will
	be maintained during a switch reset.
	During port auto-configuration, it will be
	used to determine which operational port
	states are allowed.
Operational Port Type	The port type that is currently active. This
	will be set during port auto-configuration
	based on the administrative port type.

59022-10 A 5-7