A – Command Line Interface | 0 | |||
|
| |||
Show Command |
|
| ||
|
|
|
|
|
|
| Table | ||
|
| |||
|
|
|
| |
| Entry | Description |
| |
|
|
|
| |
| RxLinkResets | Number of link reset primitives received from an attached |
| |
|
|
| device. |
|
| RxOfflineSeq | Number of offline sequences received. An OLS is issued for |
| |
|
|
| link initialization, a Receive & Recognize Not_Operational |
|
|
|
| (NOS) state, or to enter the offline state. |
|
| TotalErrors | Total number of errors detected. |
| |
| TotalLIPsRecvd | Number of loop initialization primitive frames received by this |
| |
|
|
| port. |
|
| TotalLIPsXmitd | Number of loop initialization primitive frames transmitted by |
| |
|
|
| this port. |
|
| TotalLinkResets | Total number of link reset primitives. |
| |
| TotalOfflineSeq | Total number of Offline Sequences issued and received by |
| |
|
|
| this port. |
|
| TotalRxFrames | Total number of frames received by this port. |
| |
| TotalRxWords | Total number of words received by this port. |
| |
| TotalTxFrames | Total number of frames issued by this port. |
| |
| TotalTxWords | Total number of words issued by this port. |
| |
| TxLinkResets | Number of Link Resets issued by this port. |
| |
| TxOfflineSeq | Total number of Offline Sequences issued by this port. |
| |
|
|
|
|
|
post log
Displays the Power On Self Test (POST) log which contains results from the most recently failed POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the ”Show Setup Command” on page
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric.
