Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic SANBOX2-8C/16 manual Timeout Values

Models: SANBOX2-8C/16

1 266

Download 266 pages 59.06 Kb

Page 112

4 – Managing Switches	0
4 – Managing Switches
Configuring a Switch

4.7.2.9

Timeout Values

The switch timeout values determine the timeout values for all ports on the switch. Table 4-5describes the switch timeout parameters. The timeout values must be the same for all switches in the fabric.

Note: Mismatched timeout values will disrupt the fabric. These should not be changed unless absolutely necessary. Therefore, the switch must be offline to change these values. Use the Switch Properties dialog to take the switch offline.

	Table 4-5. Timeout Values

Parameter	Description

R_A_TOV	Resource Allocation Timeout: Represents the maximum time a frame
	could be delayed in the Fabric and still be delivered. The default is
	10000 milliseconds.
E_D_TOV	Error Detect Timeout: Represents the maximum round trip time that
	an operation between two N_Ports could require. The default is 2000
	milliseconds.

4-24	59022-10 A

Image 112

Q-Logic SANBOX2-8C/16 manual Timeout Values

Contents

SANbox2-8c/16 Switch Management User’s Guide SANbox2-8c/16 Switch Management User’s Guide Document Revision HistoryTable of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Section Managing Switches 4.1 Snmp Configuration 4.2 Snmp Trap Configuration Changing the Default Performance View File Encryption KeySection Managing Ports 3.3 NTP ClientAppendix a Command Line Interface 7.3Glossary Index FiguresTables Switch Operational Parameters SANbox2-8c/16 Switch Management User’s Guide 59022-10 a Intended Audience Related MaterialsJdom License Technical Support AvailabilityTraining Contact InformationIntroduction Technical Support 59022-10 a Using SANsurfer Switch Manager Installing the Management ApplicationSANsurfer Switch Manager For a Windows workstationFor a Linux workstation For a Solaris workstationSMS Installation for Windows SANsurfer Management SuiteChglax.bat SMS Installation for Linux SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup DialogSANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Management SuiteUninstalling SANsurfer Switch Manager SMS UninstallStandalone Uninstall Pkgrm QLGCsolSetting SANsurfer Switch Manager Preferences Saving and Opening Fabric View FilesPreferences Dialog SANsurfer Switch Manager Using Online Help Viewing Software Version and Copyright InformationTopology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu BarMenu options in the topology display are shown in Figure Faceplate Display Menu Menu options in the faceplate display are shown in FigureTopology Display Shortcut Keys Topology Display Menu Shortcut KeysFaceplate Display Shortcut Keys Faceplate Display Menu Shortcut KeysReset Hot reset Hard Reset 59022-10 a Tool Bar Tool Bar ButtonsFabric Tree Fabric TreeGraphic Window Working Status IndicatorData Window and Tabs Using the Topology Display Switch and Link StatusSelecting Switches and Links Working with Switches and LinksArranging Switches in the Display Opening the Faceplate Display and Topology Popup Menus Topology Data WindowsUsing the Faceplate Display Port Views and StatusSelecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows Page User Account Security Fabric SecurityComponents of Fibre Channel fabric security are Fabric Services Enabling Snmp ConfigurationClick the In-band Management Enable button Enabling In-band ManagementSaving a Version Snapshot Fabric TrackerViewing and Comparing Version Snapshots Exporting Version Snapshots to a File Managing the Fabric DatabaseAdding a Fabric Add a New Fabric DialogRemoving a Fabric Opening a Fabric View FileSaving a Fabric View File Rediscovering a FabricAdding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Deleting Switches and LinksFabric Status Topology Display Switch and Status Icons Switch Icon DescriptionDisplaying the Event Browser Events BrowserSeverity Levels Description IconFiltering the Event Browser Filter Events DialogSorting the Event Browser Saving the Event Browser to a FileDevices Data Window Devices Data Window EntriesActive Zone Set Data Window Active Zone Set Data WindowSANsurfer Switch Manager enables you to do the following Link Data WindowWorking with Device Information and Nicknames Displaying Detailed Device InformationManaging Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Zones Soft ZonesAliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following Editing the Zoning Database Edit Zoning DialogManaging Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto SaveSaving the Zoning Database to a File Default VisibilityRestoring the Zoning Database from a File Removing All Zoning Definitions Restoring the Default Zoning DatabaseManaging Zone Sets Creating a Zone Set Copying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Managing Zones Removing a Zone SetManaging zones involves the following Creating a Zone in a Zone Set Adding Zone Members Renaming a Zone or a Zone Set Removing a Zone MemberRemoving a Zone from a Zone Set Removing a Zone from All Zone SetsManaging Aliases Changing Zone TypesCreating an Alias Adding a Member to an Alias Removing an Alias from All ZonesMerging Fabrics and Zoning Zone Merge FailureZone Merge Failure Recovery Managing Switches Managing User Accounts Factory User AccountsUser Account Administration Dialog Add Account Creating User AccountsUser Account Administration Dialog Remove Account Removing a User AccountChanging a User Account Password User Account Administration Dialog- Change PasswordUser Account Administration Dialog Modify Account Modifying a User AccountDisplaying Switch Information Faceplate DisplayManaging Switches Displaying Switch Information Switch Data Window Switch Data Window EntriesRatov Displaying Detailed Device Information on page 3-17for Port Statistics Data Window Port Information Data WindowConfigured and Active Zonesets Data Window Configured Zonesets Data WindowConfiguring Port Threshold Alarms Port Threshold Alarm Configuration DialogPaging a Switch EventCount Sample WindowSetting the Date/Time and Enabling NTP Client Resetting a SwitchSwitch Resets Type DescriptionConfiguring a Switch Using the Configuration WizardSwitch Properties 10. Switch Properties DialogSwitch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management InterfaceBroadcast Support In-band ManagementInterop Mode for Zoning Legacy Port Address FormatTimeout Values Timeout ValuesNetwork Properties 11. Network Properties DialogIP Configuration IP Configuration ParametersRemote Logging NTP ClientSnmp Properties 12. Snmp Properties DialogSnmp Configuration Snmp Configuration ParametersSnmp Trap Configuration Snmp Trap Configuration ParametersArchiving a Switch Restoring a Switch13. Restore Dialogs Full and Selective Restoring the Factory Default Configuration Factory Default Configuration SettingsFactory Default Configuration Settings Installing Firmware Downloading a Support FileManaging Switches Installing Firmware Displaying Hardware Status 14. Hardware Status LEDsManaging Switches Displaying Hardware Status 59022-10 a Managing Ports Displaying Port InformationDisplaying Port Types Monitoring Port StatusPort Types Displaying Port Operational States Displaying Port SpeedsPort Operational States Port SpeedsDisplaying Transceiver Media Status Transceiver Media ViewPort Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties DialogChanging Port Administrative States Port Administrative StatesChanging Port Speeds Changing Port Types Stream Guard Changing Port Symbolic NameScan Device Using the Extended Credits Wizard Designate Donor PortsResetting a Port Testing PortsTesting Ports Graphing Port Performance Fabric View GraphsStarting SANsurfer Performance Viewer Save Default Performance View File Dialog Exiting SANsurfer Performance ViewerSaving and Opening Performance View Files DisplayedSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeySetting the Polling Frequency Displaying Graphs Arranging Graphs in the DisplayDefault Graph Options Dialog Customizing GraphsErrors check box „ Total frames transmitted and received Total Frames„ Total frames transmitted Total Tx Frames „ Total frames received Total Rx FramesPrinting Graphs Rescaling a Selected GraphSaving Graph Statistics to a File Command Line Interface Logging On to a SwitchWorking with Switch Configurations User AccountsModifying a Configuration Backing up and Restoring Switch Configurations Command as shown Date, configswitch16910112003, for exampleCommands Table A-1. Command-Line CompletionTable A-2. Commands Listed by Authority Level Admin Session CommandsAdmin Command AuthoritySyntax KeywordsAlias Command Syntax aliasRemove alias memberlist Members aliasRename aliasold aliasnew Config Command Syntax configKeywords activate configname Edit confignameRestore Manager Archive function are not compatible with the ConfigRestore command Save configname# ftp symbolicname or ipaddress Download the file to the workstationCreate Support Command Admin sessionFollowing is an example of the Create Support command Create supportYou have transferred 43430 bytes in 1 files Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Hardreset Command SyntaxHelp Command Keywords commandSyntax help command keyword Authority NoneHistory Command Authority None Syntax historyHotreset Command HotresetImage Command CleanupInstall ImageFtp Ftp switchname Wait for the unpack to complete Lip Command Following is an example of the Lip commandReinitializes the specified loop port Lip portnumberPasswd Command Syntax passwd accountname Keywords accountnameSyntax ping ipaddress Ping CommandKeywords ipaddress Ps Command Following is an example of the Ps commandSyntax Examples Displays current system process informationCloses the Telnet session Quit CommandSyntax quit, exit, or logout Reset Command Config confignameSystem Table A-3. Switch Configuration DefaultsZoning Table A-4. Port Configuration Defaults ArbffTable A-5. Port Threshold Alarm Configuration Defaults Table A-6. Zoning Configuration DefaultsTable A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Set Command Syntax setSwitch state Setup optionPort option Set Config Command Set configTable A-9. Set Config Port Parameters Port portnumberSend Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Table A-10. Set Config Switch Parameters Table A-11. Set Config Threshold Parameters ThresholdTable A-12. Set Config Zoning Parameters Following is an example of the Set Config Switch command ArbffFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command AttributesSet Log Command Set logArchive ClearDisplay filter Level filterPort portlist SaveStart StopSet Port Command Command Line Interface Set Port Command Set Setup Command Set setupTable A-13. Snmp Configuration Settings Snmp SystemTable A-14. System Configuration Settings Table A-14. System Configuration Settings If you wish Following is an example of the Set Setup System command SANbox2 admin # set setup systemShow Command Alarm optionKeywords about BroadcastLog option Fdmi portwwnNs option Perf option PagebreakTable A-15. Show Port Parameters Lipalpdalps Post log Steering domainidTable A-16. Switch Operational Parameters SupportDisplays all connected devices TopologyUsers Following is an example of the Show Fabric command Following is an example of the Show Domains commandVersion Following is an example of the Show Fdmi command Following is an example of the Show Fdmi WWN commandFollowing is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Following is an example of the Show Interface command Collisions0 txqueuelen100Following is an example of the Show Port command PL-XPL-VC-SG3-22Following is an example of the Show Switch command Following is an example of the Show Topology commandCommand Line Interface Following is an example of the Show Version command Show Config Command Show configFollowing is an example of the Show Config Switch command Following is an example of the Show Config Threshold commandFollowing is an example of the Show Config Zoning command Show Log Command Show logNumber of events ComponentSettings LevelOptions PortFollowing is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup System command Command Line Interface Show Setup CommandPower from the switch Shutdown CommandShutdown Test Command TestPort portnumber testtype StatusTest port x internal Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Following is an example of the User Add command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List commandFollowing is an example of the Whoami command Whoami CommandWhoami Zone Command Syntax zoneMembers zone Remove zone memberlistRename zoneold zonenew Type zone zonetypeFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zonesetRename zonesetold zonesetnew Remove zoneset zonelistZones zoneset Zoning Command Keywords activeOpens a Zoning Edit session HistoryLimits Table A-17. Zoning Database LimitsFollowing is an example of the Zoning Limits command E1JBOD1 E2JBOD2Following is an example of the Zoning List command 102 59022-10 a Access Control List Zone Administrative StateAlarm BootPClass 3 Service Configured Zone SetsDefault Visibility Fabric Management SwitchInput Power LED Inter-Switch LinkMaintenance Button Maintenance ModePower On Self Test Post Principal SwitchSANsurfer Switch Manager Small Form-Factor PluggableIndex Index-2 59022-10 a 59022-10 a Index-3 Index-4 59022-10 a 59022-10 a Index-5 Index-6 59022-10 a 59022-10 a Index-7