Dukane 8919H-RJ, 8920H-RJ, 8755J-RJ user manual Response Limit Time, Bytes Interval Timeout

OPTION menu

Item		Description
		RESPONSE LIMIT TIME
		Select the time period to wait for receiving
		response data from other device communicating by
		the NETWORK BRIDGE and the HALF-DUPLEX
		through the CONTROL port.
		OFF ó 1s ó 2s ó 3s
		OFF: Select this mode if it is not required to check
		the responses from the device that the projector
		sends data to. In this mode, the projector can
		send out data from the computer continuously.
		1s /2s /3s: Select the time period to keep the
		projector waiting for response from the device
		that the projector sends data to. While waiting the
		response, the projector does not send out any
SERVICE	COMMUNICATION	data from the CONTROL port.
		• This menu is available only when the NETWORK
(continued)	(continued)	BRIDGE is selected for the COMMUNICATION
		TYPE and the HALF-DUPLEX is selected for the
		TRANSMISSION METHOD (48).
		• OFF is selected as the default setting.
		BYTES INTERVAL TIMEOUT
		Select the blank time length to judge that the
		response data has finished in the communicating
		in the condition of the NETWORK BRIDGE and
		the HALF-DUPLEX through the CONTROL port.
		50ms ó 100ms ó 150ms ó 200ms

•This menu is available only when NETWORK BRIDGE is selected for the COMMUNICATION TYPE and HALF-DUPLEX is selected for the TRANSMISSION METHOD (48).

•50ms is selected as the default setting.

(continued on next page)

49