Operating
Correcting the keystone distortions
1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.
2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following.
(1)AUTO executes automatic vertical keystone correction.
(2)MANUAL displays a dialog for keystone correction. Use the ◄/► buttons for adjustment.
To close the dialog and complete this operation, press KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
KEYSTONE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY | FREEZE | PAGE |
| VOLUME |
ON |
| UP |
| |
|
|
|
| |
OFF |
| DOWN |
| |
|
|
|
| |
KEYSTONE | MY BUTTON | 2 | MUTE | |
| 1 |
|
| |
●The adjustable range of this function will vary among inputs. For some input, this function may not work well.
●When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, automatic vertical keystone correction may not work correctly.
●When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE
●When the projector is placed on the level (about ±3°), the automatic keystone distortion correction may not work.
●When the projector is inclined to near ±30 degree or over, this function may not work well.
●This function will be unavailable when Transition Detector is on (59).
Using the magnify feature | MAGNIFY |
| |
1. | Press the ON button of MAGNIFY on the remote control. | ON/OFF button | |
|
| ||
The “MAGNIFY” indication will appear on the screen and the |
|
| |
| projector will go into the MAGNIFY mode. When the ON button | MY SOURCE/ |
|
| VIDEO COMPUTER DOC.CAMERA |
| |
|
|
| |
| of MAGNIFY is pressed first after the projector is started, the | ASPECT AUTO SEARCH | BLANK |
| MAGNIFY FREEZE PAGE | VOLUME | |
|
| UP |
|
picture will be zoomed twice. The indication will disappear in | ON |
| |
several seconds with no operation. | DOWN |
| OFF |
2. Use the ▲/▼ cursor buttons to adjust the zoom level.
To move the zoom area, press the POSITION button in the
MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.
●The projector automatically exits from the MAGNIFY mode when the input signal is changed or when the display condition is changed.
●In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want.
21
