Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it according to the following table.
Phenomenon | Cases not involving a machine defect | Reference | |
page | |||
|
| ||
|
|
| |
| The electrical power cord is not plugged in. | 12 | |
| Correctly connect the power cord. | ||
|
| ||
| The main power source has been interrupted during |
| |
| operation such as by a power outage (blackout), etc. | 12, 15 | |
| Please disconnect the power plug from the power outlet, | ||
Power does not | and allow the projector to cool down at least 10 minutes, |
| |
then turn the power on again. |
| ||
come on. |
|
| |
Either there is no lamp and/or lamp cover, or either |
| ||
|
| ||
| of these has not been properly fixed. |
| |
| Please turn the power off and disconnect the power plug from | 62, 63 | |
| the power outlet, and allow the projector to cool down at least | ||
| 45 minutes. After the projector has sufficiently cooled down, |
| |
| please make confirmation of the attachment state of the lamp |
| |
| and lamp cover, and then turn the power on again. |
| |
| The signal cables are not correctly connected. | 9 | |
| Correctly connect the connection cables. | ||
|
| ||
| Signal source does not correctly work. | – | |
| Correctly set up the signal source device by referring to the | ||
| manual of the source device. |
| |
Neither sounds | The input changeover settings are mismatched. | 16, 17 | |
nor pictures are | Select the input signal, and correct the settings. | ||
outputted. |
|
| |
The BLANK function for pictures and the MUTE |
| ||
|
| ||
| function for sounds are working. |
| |
| AV MUTE may be active. | 16, 22, | |
| Refer to the item “Sound does not come out” and “No | 45 | |
| pictures are displayed” on the next page to turn off the |
| |
| MUTE and BLANK functions. |
| |
(Continued on next page) |
| ||
71
