Dukane 8755J-RJ, 8920H-RJ, 8919H-RJ INPUT menu, Description, Progressive, Video Nr, Color Space

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ buttons switches the progress mode.
	TV ó FILM ó OFF
	• This function is performed only for a video signal, s-video signal or
PROGRESSIVE	component video signal of 480i@60 or 576i@50.
	• When TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select OFF, even
	though the screen image may lose sharpness.
	Using the ▲/▼ buttons switches the noise reduction mode.
	HIGH ó MID ó LOW
VIDEO NR	• This function is performed only for a video signal, s-video signal or
	component video signal of 480i@60 or 576i@50.
	• When this function is excessive, it may cause a certain
	degradation of the picture.

Using the ▲/▼ buttons switches the mode for color space.

	AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE	• This item can be selected only for a computer signal or a
	component video signal (except SCART RGB).

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

Using the ▲/▼ buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port.

COMPONENT ó SCART RGB

COMPONENT When the SCART RGB is selected, the COMPONENT (Y, Cb/ Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer.

(continued on next page)

32