NETWORK menu
Item
Description
| Selecting this item displays the MY | |
| IMAGE menu. | |
| The application software “PJImage” | |
| is required to store image(s) into the | |
| projector. | |
| Use the ▲/▼ buttons to select an item which is a still image by the | |
| MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the | |
| User’s Manual - Network Guide) and the ► or ENTER button to | |
| display the image. | |
| • The item without image stored cannot be selected. | |
| • The image names are each displayed in 16 characters or less. | |
MY IMAGE | To switch the image displayed | |
| Use the ▲/▼ buttons. | |
| To return to the menu | |
| Press the ◄ button on the remote control. | |
| To erase the image displayed and its source file in the projector. | |
| (1) Press the RESET button on the | |
| remote control while displaying an | |
| image to display the MY IMAGE | |
| DELETE menu. | |
| (2) Press the ► button to perform to erase. | |
| To stop erasing, press the ◄ button. | |
| Use the ▲/▼ buttons to turn the AMX Device Discovery on/off. | |
AMX D.D. | ON OFF | |
When ON is selected, the projector can be detected by controllers | ||
(AMX Device | ||
Discovery) | of AMX connected to the same network. For the details of AMX | |
| Device Discovery, visit the AMX web site. | |
| URL: http://www.amx.com/ |
(continued on next page)
54
