Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic SANBOX2-8C/16 manual Topology Display Switch and Status Icons, Switch Icon Description

Models: SANBOX2-8C/16

1 266

Download 266 pages 59.06 Kb

Page 58

3 – Managing Fabrics	0
3 – Managing Fabrics
Displaying Fabric Information

The topology display uses switch and status icons to provide status information about switches, inter-switch links, and the Ethernet connection. The switch status icons, displayed on the left side of a switch, vary in shape and color. Switches controlled by an Ethernet Internet Protocol have a colored Ethernet icon displayed on the right side of the switch. A green Ethernet icon indicates normal operation, yellow indicates a condition that may require attention to maintain maximum performance, and red indicates a potential failure. Table 3-1shows the different switch icons and their meanings.

Table 3-1. Topology Display Switch and Status Icons

Switch Icon

Description

SANbox2-16 Switch

Normal operation (Green)

Warning–operational with errors (Yellow)

Critical–potential failure (Red)

Unknown–communication status unknown, unreachable, or unmanageable (Blue)

Fabric Management Switch

Ethernet connection normal (Green)

Ethernet connection warning (Yellow)

Ethernet connection critical (Red)

SANbox2-8c Switch

Switch is not manageable with this version of SANsurfer Switch Manager. Use the management application that was shipped with this switch.

3-10	59022-10 A

Image 58

Contents

SANbox2-8c/16 Switch Management User’s Guide SANbox2-8c/16 Switch Management User’s Guide Document Revision HistoryTable of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Section Managing Switches Section Managing Ports 4.1 Snmp Configuration 4.2 Snmp Trap ConfigurationChanging the Default Performance View File Encryption Key 3.3 NTP ClientAppendix a Command Line Interface 7.3Glossary Index FiguresTables Switch Operational Parameters SANbox2-8c/16 Switch Management User’s Guide 59022-10 a Intended Audience Related MaterialsJdom License Training Technical SupportAvailability Contact InformationIntroduction Technical Support 59022-10 a Using SANsurfer Switch Manager Installing the Management ApplicationFor a Linux workstation SANsurfer Switch ManagerFor a Windows workstation For a Solaris workstationSMS Installation for Windows SANsurfer Management SuiteChglax.bat SMS Installation for Linux SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup DialogSANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Management SuiteUninstalling SANsurfer Switch Manager SMS UninstallStandalone Uninstall Pkgrm QLGCsolSetting SANsurfer Switch Manager Preferences Saving and Opening Fabric View FilesPreferences Dialog SANsurfer Switch Manager Using Online Help Viewing Software Version and Copyright InformationTopology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu BarMenu options in the topology display are shown in Figure Faceplate Display Menu Menu options in the faceplate display are shown in FigureTopology Display Shortcut Keys Topology Display Menu Shortcut KeysFaceplate Display Shortcut Keys Faceplate Display Menu Shortcut KeysReset Hot reset Hard Reset 59022-10 a Tool Bar Tool Bar ButtonsFabric Tree Fabric TreeGraphic Window Working Status IndicatorData Window and Tabs Using the Topology Display Switch and Link StatusSelecting Switches and Links Working with Switches and LinksArranging Switches in the Display Opening the Faceplate Display and Topology Popup Menus Topology Data WindowsUsing the Faceplate Display Port Views and StatusSelecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows Page User Account Security Fabric SecurityComponents of Fibre Channel fabric security are Click the In-band Management Enable button Fabric ServicesEnabling Snmp Configuration Enabling In-band ManagementSaving a Version Snapshot Fabric TrackerViewing and Comparing Version Snapshots Exporting Version Snapshots to a File Managing the Fabric DatabaseAdding a Fabric Add a New Fabric DialogSaving a Fabric View File Removing a FabricOpening a Fabric View File Rediscovering a FabricAdding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Deleting Switches and LinksFabric Status Topology Display Switch and Status Icons Switch Icon DescriptionDisplaying the Event Browser Events BrowserSeverity Levels Description IconFiltering the Event Browser Filter Events DialogSorting the Event Browser Saving the Event Browser to a FileDevices Data Window Devices Data Window EntriesActive Zone Set Data Window Active Zone Set Data WindowWorking with Device Information and Nicknames SANsurfer Switch Manager enables you to do the followingLink Data Window Displaying Detailed Device InformationManaging Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Zones Soft ZonesAliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following Editing the Zoning Database Edit Zoning DialogManaging Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto SaveSaving the Zoning Database to a File Default VisibilityRestoring the Zoning Database from a File Removing All Zoning Definitions Restoring the Default Zoning DatabaseManaging Zone Sets Creating a Zone Set Copying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Managing Zones Removing a Zone SetManaging zones involves the following Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from a Zone Set Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from All Zone SetsManaging Aliases Changing Zone TypesCreating an Alias Adding a Member to an Alias Removing an Alias from All ZonesMerging Fabrics and Zoning Zone Merge FailureZone Merge Failure Recovery Managing Switches Managing User Accounts Factory User AccountsUser Account Administration Dialog Add Account Creating User AccountsUser Account Administration Dialog Remove Account Removing a User AccountChanging a User Account Password User Account Administration Dialog- Change PasswordUser Account Administration Dialog Modify Account Modifying a User AccountDisplaying Switch Information Faceplate DisplayManaging Switches Displaying Switch Information Switch Data Window Switch Data Window EntriesRatov Displaying Detailed Device Information on page 3-17for Port Statistics Data Window Port Information Data WindowConfigured and Active Zonesets Data Window Configured Zonesets Data WindowConfiguring Port Threshold Alarms Port Threshold Alarm Configuration DialogCount Paging a SwitchEvent Sample WindowSetting the Date/Time and Enabling NTP Client Resetting a SwitchSwitch Resets Type DescriptionConfiguring a Switch Using the Configuration WizardSwitch Properties 10. Switch Properties DialogSwitch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management InterfaceBroadcast Support In-band ManagementInterop Mode for Zoning Legacy Port Address FormatTimeout Values Timeout ValuesNetwork Properties 11. Network Properties DialogIP Configuration IP Configuration ParametersRemote Logging NTP ClientSnmp Properties 12. Snmp Properties DialogSnmp Configuration Snmp Configuration ParametersSnmp Trap Configuration Snmp Trap Configuration ParametersArchiving a Switch Restoring a Switch13. Restore Dialogs Full and Selective Restoring the Factory Default Configuration Factory Default Configuration SettingsFactory Default Configuration Settings Installing Firmware Downloading a Support FileManaging Switches Installing Firmware Displaying Hardware Status 14. Hardware Status LEDsManaging Switches Displaying Hardware Status 59022-10 a Managing Ports Displaying Port InformationDisplaying Port Types Monitoring Port StatusPort Types Port Operational States Displaying Port Operational StatesDisplaying Port Speeds Port SpeedsDisplaying Transceiver Media Status Transceiver Media ViewPort Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties DialogChanging Port Administrative States Port Administrative StatesChanging Port Speeds Changing Port Types Stream Guard Changing Port Symbolic NameScan Device Using the Extended Credits Wizard Designate Donor PortsResetting a Port Testing PortsTesting Ports Graphing Port Performance Fabric View GraphsStarting SANsurfer Performance Viewer Save Default Performance View File Dialog Exiting SANsurfer Performance ViewerSaving and Opening Performance View Files DisplayedSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeySetting the Polling Frequency Displaying Graphs Arranging Graphs in the DisplayDefault Graph Options Dialog Customizing Graphs„ Total frames transmitted Total Tx Frames Errors check box„ Total frames transmitted and received Total Frames „ Total frames received Total Rx FramesPrinting Graphs Rescaling a Selected GraphSaving Graph Statistics to a File Command Line Interface Logging On to a SwitchWorking with Switch Configurations User AccountsModifying a Configuration Backing up and Restoring Switch Configurations Command as shown Date, configswitch16910112003, for exampleCommands Table A-1. Command-Line CompletionTable A-2. Commands Listed by Authority Level Admin Session CommandsSyntax Admin CommandAuthority KeywordsAlias Command Syntax aliasRemove alias memberlist Members aliasRename aliasold aliasnew Keywords activate configname Config CommandSyntax config Edit confignameRestore command RestoreManager Archive function are not compatible with the Config Save configname# ftp symbolicname or ipaddress Download the file to the workstationFollowing is an example of the Create Support command Create Support CommandAdmin session Create supportYou have transferred 43430 bytes in 1 files Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Hardreset Command SyntaxSyntax help command keyword Help CommandKeywords command Authority NoneHistory Command Authority None Syntax historyHotreset Command HotresetInstall Image CommandCleanup ImageFtp Ftp switchname Wait for the unpack to complete Reinitializes the specified loop port Lip CommandFollowing is an example of the Lip command Lip portnumberPasswd Command Syntax passwd accountname Keywords accountnameSyntax ping ipaddress Ping CommandKeywords ipaddress Syntax Examples Ps CommandFollowing is an example of the Ps command Displays current system process informationCloses the Telnet session Quit CommandSyntax quit, exit, or logout Reset Command Config confignameSystem Table A-3. Switch Configuration DefaultsZoning Table A-4. Port Configuration Defaults ArbffTable A-5. Port Threshold Alarm Configuration Defaults Table A-6. Zoning Configuration DefaultsTable A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Set Command Syntax setSwitch state Setup optionPort option Table A-9. Set Config Port Parameters Set Config CommandSet config Port portnumberSend Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Table A-10. Set Config Switch Parameters Table A-11. Set Config Threshold Parameters ThresholdTable A-12. Set Config Zoning Parameters Following is an example of the Set Config Switch command ArbffFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command AttributesArchive Set Log CommandSet log ClearDisplay filter Level filterStart Port portlistSave StopSet Port Command Command Line Interface Set Port Command Table A-13. Snmp Configuration Settings Set Setup CommandSet setup Snmp SystemTable A-14. System Configuration Settings Table A-14. System Configuration Settings If you wish Following is an example of the Set Setup System command SANbox2 admin # set setup systemKeywords about Show CommandAlarm option BroadcastLog option Fdmi portwwnNs option Perf option PagebreakTable A-15. Show Port Parameters Lipalpdalps Post log Steering domainidTable A-16. Switch Operational Parameters SupportDisplays all connected devices TopologyUsers Following is an example of the Show Fabric command Following is an example of the Show Domains commandVersion Following is an example of the Show Fdmi command Following is an example of the Show Fdmi WWN commandFollowing is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Following is an example of the Show Interface command Collisions0 txqueuelen100Following is an example of the Show Port command PL-XPL-VC-SG3-22Following is an example of the Show Switch command Following is an example of the Show Topology commandCommand Line Interface Following is an example of the Show Version command Show Config Command Show configFollowing is an example of the Show Config Switch command Following is an example of the Show Config Threshold commandFollowing is an example of the Show Config Zoning command Number of events Show Log CommandShow log ComponentOptions SettingsLevel PortFollowing is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup System command Command Line Interface Show Setup CommandPower from the switch Shutdown CommandShutdown Port portnumber testtype Test CommandTest StatusTest port x internal Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Following is an example of the User Add command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List commandFollowing is an example of the Whoami command Whoami CommandWhoami Zone Command Syntax zoneRename zoneold zonenew Members zoneRemove zone memberlist Type zone zonetypeFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zonesetRename zonesetold zonesetnew Remove zoneset zonelistZones zoneset Opens a Zoning Edit session Zoning CommandKeywords active HistoryLimits Table A-17. Zoning Database LimitsFollowing is an example of the Zoning Limits command E1JBOD1 E2JBOD2Following is an example of the Zoning List command 102 59022-10 a Alarm Access Control List ZoneAdministrative State BootPDefault Visibility Class 3 ServiceConfigured Zone Sets Fabric Management SwitchMaintenance Button Input Power LEDInter-Switch Link Maintenance ModeSANsurfer Switch Manager Power On Self Test PostPrincipal Switch Small Form-Factor PluggableIndex Index-2 59022-10 a 59022-10 a Index-3 Index-4 59022-10 a 59022-10 a Index-5 Index-6 59022-10 a 59022-10 a Index-7