Change directories to the package location | Q-Logic SANBOX2-8C/16

0	2 – Using SANsurfer Switch Manager
	2 – Using SANsurfer Switch Manager
	Installing the Management Application

3.On the SANbox Switch Software page, scroll to the SANbox2-8c/16 Series area.

4.In the Operating System column, click the Solaris SPARC link.

5.Click the SANsurfer Management Software link to open the Save As dialog.

6.Enter a path name to save the sansurfer_solaris_install.bin file and click the Save button.

7.Open a terminal window for the directory in which the

sansurfer_solaris_install.bin file was saved, and enter the following:

chmod +x sansurfer_solaris_install.bin

8.Execute the install program and follow the installation instructions:

./sansurfer_solaris_install.bin

9.When the installation is complete, start SANsurfer Management Suite using the SANsurfer file in the installation directory. Click the Switch tab from the left pane to open SANsurfer Switch Manager. From the Help menu, select About ... and make note of the release version number. Close SANsurfer Management Suite.

10.To ensure that you are using the most recent version of SANsurfer Switch Manager, visit the QLogic support web page and go to Drivers, Software and Manuals.

a.Select your switch model from the pull-down menu. Locate the description for SANsurfer Switch Manager for Linux under "Management Software".

b.If the release version number (4.02.xx) is greater than what is currently installed on your workstation, down load the new version. Otherwise, no upgrade is needed.

11.Open the tar file and save the

SANsurferSwitchMgr_QLGCsol_4.02.xx.bin file in a folder and make the file executable.

#chmod +x sansurferswitchmgr_QLGCsol_4.02.xx

12.Install the new SANsurfer Switch Manager package:

#pkgadd -d sansurferswitchmgr_QLGCsol_4.02.xx

13.Change directories to the package location:

#cd /usr/opt/QLGCsol/bin

14.Locate and execute the file sbm_over_sms.sh:

#./sbm_over_sms.sh

59022-10 A

2-7

Image 23

Q-Logic SANBOX2-8C/16 manual Install the new SANsurfer Switch Manager package, Change directories to the package location

Contents

SANbox2-8c/16 Switch Management User’s Guide Document Revision History SANbox2-8c/16 Switch Management User’s Guide Table of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Section Managing Switches 3.3 NTP Client 4.1 Snmp Configuration 4.2 Snmp Trap ConfigurationChanging the Default Performance View File Encryption Key Section Managing Ports 7.3 Appendix a Command Line Interface Figures Glossary Index Tables Switch Operational Parameters SANbox2-8c/16 Switch Management User’s Guide 59022-10 a Related Materials Intended Audience Jdom License Contact Information Technical SupportAvailability Training Introduction Technical Support 59022-10 a Installing the Management Application Using SANsurfer Switch Manager For a Solaris workstation SANsurfer Switch ManagerFor a Windows workstation For a Linux workstation SANsurfer Management Suite SMS Installation for Windows Chglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer command SANsurfer Switch Manager Window Exiting SANsurfer Management Suite Save Default Fabric View File Dialog SMS Uninstall Uninstalling SANsurfer Switch Manager Pkgrm QLGCsol Standalone Uninstall Saving and Opening Fabric View Files Setting SANsurfer Switch Manager Preferences Preferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online Help Faceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu options in the topology display are shown in Figure Menu BarTopology Display Menu Menu options in the faceplate display are shown in Figure Faceplate Display Menu Topology Display Menu Shortcut Keys Topology Display Shortcut Keys Faceplate Display Menu Shortcut Keys Faceplate Display Shortcut Keys Reset Hot reset Hard Reset 59022-10 a Tool Bar Buttons Tool Bar Fabric Tree Fabric Tree Data Window and Tabs Working Status IndicatorGraphic Window Switch and Link Status Using the Topology Display Arranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Topology Data Windows Opening the Faceplate Display and Topology Popup Menus Port Views and Status Using the Faceplate Display Opening the Faceplate Popup Menu Working with PortsSelecting Ports Faceplate Data Windows Page Components of Fibre Channel fabric security are Fabric SecurityUser Account Security Enabling In-band Management Fabric ServicesEnabling Snmp Configuration Click the In-band Management Enable button Viewing and Comparing Version Snapshots Fabric TrackerSaving a Version Snapshot Managing the Fabric Database Exporting Version Snapshots to a File Add a New Fabric Dialog Adding a Fabric Rediscovering a Fabric Removing a FabricOpening a Fabric View File Saving a Fabric View File Adding a New Switch to a Fabric Replacing a Failed Switch Fabric Status Deleting Switches and LinksDisplaying Fabric Information Switch Icon Description Topology Display Switch and Status Icons Events Browser Displaying the Event Browser Description Icon Severity Levels Filter Events Dialog Filtering the Event Browser Saving the Event Browser to a File Sorting the Event Browser Devices Data Window Entries Devices Data Window Active Zone Set Data Window Active Zone Set Data Window Displaying Detailed Device Information SANsurfer Switch Manager enables you to do the followingLink Data Window Working with Device Information and Nicknames Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Soft Zones Zones Zone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Edit Zoning Dialog Editing the Zoning Database Managing Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Interop Auto Save Configuring the Zoning Database Restoring the Zoning Database from a File Default VisibilitySaving the Zoning Database to a File Managing Zone Sets Restoring the Default Zoning DatabaseRemoving All Zoning Definitions Creating a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from All Zone Sets Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone Set Creating an Alias Changing Zone TypesManaging Aliases Removing an Alias from All Zones Adding a Member to an Alias Zone Merge Failure Merging Fabrics and Zoning Zone Merge Failure Recovery Managing Switches Factory User Accounts Managing User Accounts Creating User Accounts User Account Administration Dialog Add Account Removing a User Account User Account Administration Dialog Remove Account User Account Administration Dialog- Change Password Changing a User Account Password Modifying a User Account User Account Administration Dialog Modify Account Faceplate Display Displaying Switch Information Managing Switches Displaying Switch Information Switch Data Window Entries Switch Data Window Ratov Displaying Detailed Device Information on page 3-17for Port Information Data Window Port Statistics Data Window Configured Zonesets Data Window Configured and Active Zonesets Data Window Port Threshold Alarm Configuration Dialog Configuring Port Threshold Alarms Sample Window Paging a SwitchEvent Count Resetting a Switch Setting the Date/Time and Enabling NTP Client Type Description Switch Resets Using the Configuration Wizard Configuring a Switch 10. Switch Properties Dialog Switch Properties Switch Administrative States Symbolic NameSwitch Administrative States Fabric Device Management Interface Domain ID and Domain ID Lock In-band Management Broadcast Support Legacy Port Address Format Interop Mode for Zoning Timeout Values Timeout Values 11. Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration NTP Client Remote Logging 12. Snmp Properties Dialog Snmp Properties Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap Configuration Restoring a Switch Archiving a Switch 13. Restore Dialogs Full and Selective Factory Default Configuration Settings Restoring the Factory Default Configuration Factory Default Configuration Settings Downloading a Support File Installing Firmware Managing Switches Installing Firmware 14. Hardware Status LEDs Displaying Hardware Status Managing Switches Displaying Hardware Status 59022-10 a Displaying Port Information Managing Ports Port Types Monitoring Port StatusDisplaying Port Types Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational States Transceiver Media View Displaying Transceiver Media Status Port Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Speeds Changing Port Types Scan Device Changing Port Symbolic NameStream Guard Designate Donor Ports Using the Extended Credits Wizard Testing Ports Resetting a Port Testing Ports Fabric View Graphs Graphing Port Performance Starting SANsurfer Performance Viewer Exiting SANsurfer Performance Viewer Save Default Performance View File Dialog Displayed Saving and Opening Performance View Files Setting the Polling Frequency Changing the Default Performance View File Encryption KeySetting SANsurfer Performance Viewer Preferences Arranging Graphs in the Display Displaying Graphs Customizing Graphs Default Graph Options Dialog „ Total frames received Total Rx Frames Errors check box„ Total frames transmitted and received Total Frames „ Total frames transmitted Total Tx Frames Saving Graph Statistics to a File Rescaling a Selected GraphPrinting Graphs Logging On to a Switch Command Line Interface User Accounts Working with Switch Configurations Modifying a Configuration Backing up and Restoring Switch Configurations Date, configswitch16910112003, for example Command as shown Table A-1. Command-Line Completion Commands Admin Session Commands Table A-2. Commands Listed by Authority Level Keywords Admin CommandAuthority Syntax Syntax alias Alias Command Rename aliasold aliasnew Members aliasRemove alias memberlist Edit configname Config CommandSyntax config Keywords activate configname Save configname RestoreManager Archive function are not compatible with the Config Restore command Download the file to the workstation # ftp symbolicname or ipaddress Create support Create Support CommandAdmin session Following is an example of the Create Support command You have transferred 43430 bytes in 1 files Keywords MMDDhhmmCCYY Date CommandSyntax date Syntax firmware install Firmware Install CommandAuthority Admin Syntax Hardreset Command Authority None Help CommandKeywords command Syntax help command keyword Authority None Syntax history History Command Hotreset Hotreset Command Image Image CommandCleanup Install Ftp Ftp switchname Wait for the unpack to complete Lip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop port Syntax passwd accountname Keywords accountname Passwd Command Keywords ipaddress Ping CommandSyntax ping ipaddress Displays current system process information Ps CommandFollowing is an example of the Ps command Syntax Examples Syntax quit, exit, or logout Quit CommandCloses the Telnet session Config configname Reset Command Zoning Table A-3. Switch Configuration DefaultsSystem Arbff Table A-4. Port Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-5. Port Threshold Alarm Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Syntax set Set Command Port option Setup optionSwitch state Port portnumber Set Config CommandSet config Table A-9. Set Config Port Parameters Send Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Table A-10. Set Config Switch Parameters Threshold Table A-11. Set Config Threshold Parameters Table A-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning command Clear Set Log CommandSet log Archive Level filter Display filter Stop Port portlistSave Start Set Port Command Command Line Interface Set Port Command Snmp System Set Setup CommandSet setup Table A-13. Snmp Configuration Settings Table A-14. System Configuration Settings Table A-14. System Configuration Settings If you wish SANbox2 admin # set setup system Following is an example of the Set Setup System command Broadcast Show CommandAlarm option Keywords about Ns option Fdmi portwwnLog option Table A-15. Show Port Parameters PagebreakPerf option Lipalpdalps Steering domainid Post log Support Table A-16. Switch Operational Parameters Users TopologyDisplays all connected devices Version Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi command Following is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Collisions0 txqueuelen100 Following is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command Command Line Interface Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Threshold command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Component Show Log CommandShow log Number of events Port SettingsLevel Options Following is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Command Line Interface Show Setup Command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Status Test CommandTest Port portnumber testtype Test port x internal Command Line Interface Test Command Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Whoami Whoami CommandFollowing is an example of the Whoami command Syntax zone Zone Command Type zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Zones zoneset Remove zoneset zonelistRename zonesetold zonesetnew History Zoning CommandKeywords active Opens a Zoning Edit session Table A-17. Zoning Database Limits Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command 102 59022-10 a BootP Access Control List ZoneAdministrative State Alarm Fabric Management Switch Class 3 ServiceConfigured Zone Sets Default Visibility Maintenance Mode Input Power LEDInter-Switch Link Maintenance Button Small Form-Factor Pluggable Power On Self Test PostPrincipal Switch SANsurfer Switch Manager Index Index-2 59022-10 a 59022-10 a Index-3 Index-4 59022-10 a 59022-10 a Index-5 Index-6 59022-10 a 59022-10 a Index-7