Section 1
Introduction
This manual describes the switch management tools which include the SANsurfer Switch Manager™ application (version 4.02) and the Command Line Interface (CLI) for the (firmware version 4.2). The SANsurfer Switch Manager switch management application is the primary focus of this manual which is organized as follows:
Section 1 describes the intended audience for this manual, related materials, and technical support.
Section 2 describes how to use SANsurfer Switch Manager, its menus, and its displays.
Section 3 describes fabric management tasks.
Section 4 describes switch management tasks.
Section 5 describes port and device management tasks.
Appendix A describes the command line interface.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their installation and use. It is intended for users responsible for installing and using switch management tools.
1.2
Related Materials
Refer to the following manuals for information about switch hardware and installation.
