A – Command Line Interface | 0 | |||
|
| |||
Set Log Command |
|
| ||
|
|
|
|
|
|
|
|
|
|
| Info |
|
| |
| Monitors informative, warning, and critical events. The informative level | |||
| describes routine events associated with a normal fabric. This is the default | |||
| severity level. |
|
| |
| None |
|
| |
| Monitors none of the severity levels. |
|
| |
| port [port_list] |
|
| |
| Specifies one or more ports to monitor for events. Choose one of the following | |||
| values: |
|
| |
| [port_list] |
|
| |
| Specifies port or ports to monitor. Use a <space> to delimit values in the list. | |||
| Ports are numbered beginning with 0. |
|
| |
| All |
|
| |
| Specifies all ports. |
|
| |
| None |
|
| |
| Disables monitoring on all ports. |
|
| |
| restore |
|
| |
| Restores and saves the port, component, and level settings to the default values. | |||
| save |
|
| |
| Saves the log settings for the component, severity level, port, and display level. | |||
| These settings remain in effect after a switch reset. The log settings can be | |||
| viewed using the Show Log Settings command. To export log entries to a file, use | |||
| the Set Log Archive command. |
|
| |
| start |
|
| |
| Starts the logging of events based on the Port, Component, and Level keywords | |||
| assigned to the current configuration. The logging continues until you enter the | |||
| Set Log Stop command. |
|
| |
| stop |
|
| |
| Stops logging of events. |
|
| |
Notes | In addition to critical, warn, and informative severity levels, the highest event | |||
| severity level is alarm. The alarm level describes events that are disruptive to the | |||
| administration or operation of a fabric and require administrator intervention. | |||
| Alarms are always logged and always displayed on the screen. |
|
| |
