Q-Logic SANBOX2-8C/16 manual SANsurfer Switch Manager, For a Windows workstation

2 – Using SANsurfer Switch Manager	0
Installing the Management Application

2.1.1

SANsurfer Switch Manager

You can install SANsurfer Switch Manager on a Windows, Linux, or Solaris workstation. To install SANsurfer Switch Manager from the SANsurfer Switch Manager disk, close all programs currently running, and insert the SANsurfer Switch Manager Installation Disk into the management workstation CD-ROM drive.

For a Windows workstation:

1.Using Windows Explorer, double-click the drive letter which contains the SANsurfer Switch Manager Installation Disk.

2.Double click the Switch_Manager folder, then double click the Windows folder.

3.Double click the executable file and follow the SANsurfer Switch Manager installation instructions.

For a Linux workstation:

1.If a file browser does not open, double-click the CD-ROM icon to open the browser. Double click the Switch_Manager folder, then double click the Linux folder. If there is no CD-ROM icon, do the following:

a.Open an xterm or other terminal window.

b.Mount the CD-ROM. From a shell prompt, enter the following command:

mount /mnt/cdrom

c.Change directory to location of the install program: cd /mnt/cdrom/Switch_Manager/Linux

2.Enter the following command to make the install file executable:

chmod +x Linux_4.02.xx_xxxx.bin

3.Execute the install program and follow the installation instructions:

./Linux_4.02.xx_xxxx.bin

For a Solaris workstation:

1.Open a terminal window. If the disk isn’t already mounted, enter the following command:

volcheck

2.Move to the directory on the disk that contains the executable. Enter the following command:

cd /cdrom/cdrom0/Switch_Manager/solaris

2-2 59022-10 A