Q-Logic SANBOX2-8C/16 manual If you wish

A – Command Line Interface	0
Set Setup Command

Examples The following is an example of the Set Setup SNMP command:

SANbox2 #> admin start

SANbox2 (admin) #> set setup snmp

A list of attributes with formatting and current values will follow.

Enter	a new	value or	simply press the		ENTER key to accept		the	current value.
If you wish		to terminate		this process	before	reaching the	end	of the list
press	'q' or 'Q' and		the	ENTER key to	do so.

Trap Severity Options
---------------------
unknown, emergency,	alert, critical, error, warning, notify, info, debug, mark
SNMPEnabled	(True / False)		[True	]
Contact	(string, max=64	chars)	[<sysContact undefined]
Location	(string, max=64	chars)	[sysLocation undefined]
Trap1Address	(dot-notated IP	Address)	[10.20.71.15	]
Trap1Port	(decimal value)		[162	]
Trap1Severity	(see allowed options above)		[warning	]
Trap1Version	(1 / 2)		[2	]
Trap1Enabled	(True / False)		[False	]
Trap2Address	(dot-notated IP	Address)	[0.0.0.0	]
Trap2Port	(decimal value)		[162	]
Trap2Severity	(see allowed options above)		[warning	]
Trap2Version	(1 / 2)		[2	]
Trap2Enabled	(True / False)		[False	]
Trap3Address	(dot-notated IP	Address)	[0.0.0.0	]
Trap3Port	(decimal value)		[162	]
Trap3Severity	(see allowed options above)		[warning	]
Trap3Version	(1 / 2)		[2	]
Trap3Enabled	(True / False)		[False	]
Trap4Address	(dot-notated IP	Address)	[0.0.0.0	]
Trap4Port	(decimal value)		[162	]
Trap4Severity	(see allowed options above)		[warning	]
Trap4Version	(1 / 2)		[2	]
Trap4Enabled	(True / False)		[False	]
Trap5Address	(dot-notated IP	Address)	[0.0.0.0	]
Trap5Port	(decimal value)		[162	]
Trap5Severity	(see allowed options above)		[warning	]
Trap5Version	(1 / 2)		[2	]
Trap5Enabled	(True / False)		[False	]
ReadCommunity	(string, max=32	chars)	[public	]
WriteCommunity	(string, max=32	chars)	[private	]

A-56 59022-10 A