Switching Through Software, Powering On the Switch

Step 2: Powering On the Switch

1.Connect the included 5V DC, 2.5A AC power

supply adapter into an available power outlet.

2.Attach the barrel plug into the power jack of the Switch.

DC 5V/2.5A

Connect the A-type connector of your USB device to an available USB A-type port on your Switch.

Repeat for each additional

USB device you wish to connect.	DC
	5V/2.5A

Legend

Camera Device	Hub	Ethernet	Generic	Gaming
		Device	Device	Device

Speakers	Mass Storage	Scanner	Keyboard	Printer
	Device

Mouse

General Basket

Active Computer Port

Inactive Computer Port

Image 9

Contents

4x4 USB Overview Table of Contents Automatic USB Printer Sharing 4x4 USB Peripheral Switch SoftwareLight-Emitting Diode LED Display Manual Push-Button Selectors Top View of the 4x4 USB Peripheral Switch Unit Display DiagramsBack View of the 4x4 USB Peripheral Switch Bottom View of the 4x4 USB Peripheral Switch Installation Software InstallationWindows Mac OS Mac OS X or above Connecting Computers to the Switch Hardware Installation Powering On the Switch Switching Through SoftwareConnecting USB Devices to the Switch USB device you wish to connect Switching USB Devices Automatic PrintingCourtesy Alert Does the Switch support automatic printer sharing? Does the Switch support USB 2.0 devices?What operating systems will the Switch work with? Naming Your Computers Switch software does not detect my computer TroubleshootingMy USB device is not detected by the Switch software Information