46
LSQT1093
Setup

Changing the date and time display style

Press the MENU button, then select [SETUP] #
[DATE/TIME] # desired display style and press
the cursor button.
≥You can also show or change the date and time
display by repeatedly pressing the DATE/TIME
button on the remote control.

Changing the display style

Press the MENU button, then select [SETUP] #
[DATE FORMAT] # desired display style and
press the cursor button.
≥The date and time function are driven by a
built-in lithium battery.
≥Make sure to check the time before recording.
≥If the time display becomes [- -], the built-in
lithium battery has run down. Use the following
steps to charge the battery. When you turn on
the power for the first time after charging, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time.

To recharge the built-in lithium battery:

Connect the AC adaptor or attach the battery to
the unit, and the built-in lithium battery will be
recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (The battery is still
being recharged even if the mode dial is set to
OFF.)
Switching the language
You can switch the language on the screen
display or the menu screen.
1Press the MENU button, then

select [LANGUAGE] and press

the cursor button.
2Select [English] and press the

cursor button.

[DATE] [D/T]
[OFF]
Display style Screen display
[Y/M/D] 2007.12.15
[M/D/Y] DEC 15 2007
[D/M/Y] 15.12.2007
DEC 15 2007 3:30PMDEC 15 2007
LSQT1093ENG.book 46 ページ ２００７年１月１５日　月曜日　午前９時２３分