Panasonic HDC-DX1PC operating instructions 114

Others

CANNOT FINALIZE.	The disc cannot be finalized (un-finalized) on this unit. (The disc
CANNOT UN-FINALIZE	was recorded on another device etc.)
	Or, you are trying to finalize a disc that has no motion pictures
THIS DISC.
	recorded on it.
CANNOT READ DISC.	There are scratches or dirt on the recording/playback side of the
PLEASE CHECK	disc. If there is dirt on the disc, use the supplied cleaning cloth to
CONDITION OF DISC.	wipe it. (l 30) If the disc is scratched, insert a new one.
CHECK CARD.	This card is not compatible or it cannot be recognized by the unit.
CARD LOCKED.	The write protection switch on the SD card is set to LOCK. (l 29)
CARD FULL.	The SD card is full so no further data can be recorded. Delete
	unnecessary files (l 82) or insert a new SD card.
TOP MENU COULD NOT	Creating a top menu has failed.
BE CREATED.	There may be scratches or dirt on the recording/playback side of the
	disc. If there is dirt on the disc, use the supplied cleaning cloth to
	wipe it. (l 30)
CANNOT PROTECT.	Scenes on the DVD-RAM for which top menus have been created
	cannot be protected.
CANNOT OPERATE.	The temperature of the unit is high so it cannot be operated. Turn off
TEMPERATURE IS HIGH.	the power, wait until the unit cools and then turn on the power again.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND
WAIT A WHILE.
THIS BATTERY CANNOT	Use a battery that is compatible with this unit. (l 32)
BE USED.	If using a Panasonic battery compatible with this unit (l 32), eject
	the battery and then insert it again. If the message appears even
	after repeating this several times, this unit needs repair. Detach the
	power and consult the dealer who you purchased this unit from. Do
	not attempt to repair it by yourself.
AGS MODE ON-REC	The AGS function is activated. (l 49)
PAUSED
PUSH THE RESET	An irregularity in the unit has been detected. Press the RESET
SWITCH.	button to restart the unit. (l 122)
CHECK THE DISC AFTER	There may be scratches or dirt on the recording/playback side of the
	disc. If there is dirt on the disc, use the supplied cleaning cloth to
PUSHING THE RESET
	wipe it. (l 30) If the disc is scratched, insert a new one.
SWITCH TO REPAIR THE
DATA.
CANNOT SET.	The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [MIC LEVEL]
	menu settings cannot be set when the color bar is set.
CHANGE MODE TO USE	The USB cable is connected in recording mode.
USB.
DISCONNECT USB	The unit cannot correctly establish the connection to the computer
CABLE.	or printer. Disconnect and then reconnect the USB cable.

114

LSQT1093