89
LSQT1093
Disc and card management
¬Rotate the mode dial to select or

rotate the mode dial to and then

select the [ ] (motion picture

playback) tab.

1Press the MENU button, then
select [SETUP] #

[AUTO PROTECT] # [ON] and

press the cursor button.
≥This function’s default setting is [ON].
≥We recommend that the auto protect
function is set to [ON] in order to prevent
accidental deletion on other devices. If
discs recorded on this unit are inserted into
other devices without protecting them, a
message may be displayed prompting you
to format the disc. If the disc is formatted,
the data on it will be erased, and the
process cannot be reversed.
≥If a disc with no recorded motion pictures is
ejected, it will not be protected.

ªTo release the disc protection

Erase all the motion pictures on the disc or
format the disc.
≥Please be aware that if a disc is formatted, then
all the data recorded will be erased and cannot
be recovered.
≥The disc will need to be re-formatted on the
device you will use.
Displaying disc information
(RAM) (-RW) (-R) (-R\DL)
Information such as the type of recorded disc,
the number of recorded scenes, the remaining
space and whether or not the disc is finalized is
displayed.
¬Rotate the mode dial to select

and then select the [ ] (motion

picture playback) tab.

Press the MENU button, then select

[SETUP] # [INFORMATION] # [YES]

and press the cursor button.

To exit the information screen

Press the MENU button.
MENU
MENU
LSQT1093ENG.book 89 ページ ２００７年１月１５日　月曜日　午前９時２３分