Panasonic HDC-DX1PC Playback using EZ Sync Hdavi Control, ≥The default setting is on

With other products

Playback using EZ Sync™ (HDAVI Control™)

(RAM) (-RW) (-R) (-R\DL) (SD)

If you connect this unit to a Panasonic TV compatible with EZ Sync™ (HDAVI Control™) with a HDMI cable, the following linked operations become possible.

≥You can use the remote control for the TV to control playback on this unit.

≥If you use the remote control for the TV to turn off the power, the power on this unit also turns off. (The power cannot be cut off when recording a motion picture, formatting a disc, finalizing a disc, un-finalizing a disc, deleting data, recovering data or connecting the unit to a computer with a USB cable.)

≥If you connect with a HDMI cable and then turn on the power, the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power On Link] setting).

–Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch the input channel. For details on how to switch input, please read the operating instructions for the TV.)

≥If EZ Sync does not work properly, refer to page 123.

1Connect this unit and a Panasonic TV compatible with EZ Sync with a HDMI cable (optional).

HDMI IN

A

≥Use a HDMI cable (optional) A with the logo shown on above.

≥If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2 or HDMI3.

2Set so that EZ Sync is activated on the connected TV.

≥Read the operating instructions of the TV for how to set etc.

3Set the mode dial to to turn on the power.

4Press the MENU button, then select [SETUP] # [EZ Sync] # [ON] and

press the cursor button.

≥The default setting is [ON].

96

LSQT1093