Panasonic HDC-DX1PC operating instructions Image stabilizer function, Red eye reduction function

Recording

Red eye reduction function

Reduces the phenomena where human eyes become red from flashes.

1Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.

2Move the cursor button right to select [].

≥The flash is activated 2 times. Do not move until the second flash is finished.

≥Use this when you take pictures of people in dark places.

≥Red eye phenomenon may appear depending on the recording conditions.

To adjust the brightness of the flash

Press the MENU button, then select [PICTURE] > [FLASH LEVEL] > desired item and press the cursor button.

MENU

[ßj]: If the brightness is too high.

[ßd0]: In normal recording

[ßi]: If the brightness is insufficient.

Image stabilizer function

This is for reducing image shakes during recording.

(RAM) (-RW) (-R) (-R\DL) (SD)

Reduces the image shaking due to hand movement when recording.

¬Rotate the mode dial to select .

Press the MENU button, then select [BASIC] # [O.I.S.] # [ON] and press the cursor button.

MENU

To cancel the image stabilizer function

Press the MENU button, then select [BASIC] # [O.I.S.] # [OFF] and press the cursor button.

≥This function’s default setting is [ON].

≥In still picture recording mode, pressing the PHOTO SHOT button halfway increases the effect of the image stabilizer function. (MEGA optical image stabilizer)

≥In the following cases, the image stabilizer function may not work effectively.

–When the digital zoom is used

–When the unit is shaken greatly

–When you record a moving subject while tracking it

65

LSQT1093