Panasonic HDC-DX1P, HDC-DX1PC Guide line function, Wind noise reduction function

66
LSQT1093
Recording
(RAM) (-RW) (-R) (-R\DL) (SD)
You can check if the image is level while
recording or playing back motion pictures and
still pictures. The function can also be used to
estimate the balance of the composition.
¬Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab. (l74)
Press the MENU button, then select
[BASIC] or [PLAY SETUP] >
[GUIDE LINES] desired item and
press the cursor button.
A[HORIZONTAL]
B[GRID1]
C[GRID2]
To cancel the guide line function
Press the MENU button, then select [BASIC] or
[PLAY SETUP] > [GUIDELINES] > [OFF].
≥The guide lines do not appear on the images
actually recorded.
(RAM) (-RW) (-R) (-R\DL)
¬Rotate the mode dial to select .
Press the MENU button, then select
[VIDEO] # [WIND CUT] # [ON] and
press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO] #
[WIND CUT] # [OFF] and press the cursor
button.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind
strength. (The surround effect may be reduced
if this function is activated in strong winds.
However, the surround effect is automatically
restored when then the wind weakens.)
≥The wind noise reduction function does not
work with an external microphone.
Guide line function
This is for viewing the slope and the
balance of the image while recording
or playing back.
Wind noise reduction function
This is for reducing the wind noise
coming into the microphone when
recording.
MENU
LSQT1093ENG.book 66 ページ ２００７年１月１５日 月曜日 午前９時２３分