99
LSQT1093
With other products
Dubbing images onto a connected DVD recorder or video device
(RAM) (-RW) (-R) (-R\DL)
Dubbing images onto a connected DVD recorder
or video device
Images are dubbed in standard picture
quality.
Use the AC adaptor to free you from worrying
about the battery running down.
1Connect this unit and a video

device.

AAV cable (supplied)
Insert the plugs as far as they will go.
2Set the mode dial to to turn

on the power.

3Change the input channel on the

video device and TV.

The channel set will differ depending on the
terminal to which the unit is connected.
4Start playback on this unit.
5Then start recording on the

connected device.

See the operating instructions of the video
device for details.

To stop dubbing

1) Stop recording on the connected device.
2) Then stop playback on this unit.
If the date and time display and function
indication are unnecessary, cancel them before
dubbing. (l46, 90)
A/V
VIDEO IN
AUDIO IN
A
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
LSQT1093ENG.book 99 ページ 2007年1月15日 月曜日 午前9時23分