63
LSQT1093
Recording
(SD)
You can record still pictures on an SD card using
the timer.
¬Rotate the mode dial to select .
1Press the cursor button. Then

move the cursor button down to

display the icon shown in the

illustration.
2Move the cursor button up to

select [Ø].

≥Each time the cursor button is pressed up,
the indication changes by one setting in the
following order: [Ø10] > [Ø2] > setting
canceled
Ø10: Starts recording after 10 seconds
Ø2: Starts recording after 2 seconds
3Press the PHOTO SHOT button.
A still picture is recorded after the [Ø10] or
[Ø2] display and the recording lamp flashes
for the time which has been set.
≥After recording, the self-timer is canceled.
≥If you press the PHOTO SHOT button
halfway and then fully in auto focus mode,
the subject is focused when the button is
pressed halfway.
≥When you press the PHOTO SHOT button
fully in auto focus mode, the subject is
focused just before recording.
To stop the timer midway thr ough
Press the MENU button. (The self-timer setting is
canceled.)
≥The self-timer is canceled if the power is turned
off or the mode dial is operated.
≥The self-timer standby mode is canceled when
you press the recording start/stop button to
start motion picture recording.
Even if you press the recording start/stop
button while the self-timer is counting down,
motion picture recording is not possible.
≥Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
≥Setting the self-timer to [Ø2] is a good way to
prevent image shake when the PHOTO SHOT
button is pressed while using a tripod etc.

Self-timer recording

LSQT1093ENG.book 63 ページ ２００７年１月１５日　月曜日　午前９時２３分